### Computer modeling for investigating the stress-strainstate of beams with hybrid reinforcement

Pages 187-195

In this article the operation of a continuous double-span beam with hybrid reinforcement, steel and composite reinforcement under the action of concentrated forces is considered. The nature of stress-strain state of structures is investigated with the help of computer modeling using a three-dimensional model. Five models of beams with different characteristics were studied. According to the results of numerical studies the data on the distribution of stresses and displacements in continuous beams was provided. The dependence of the stress-strain state on increasing the percentage of the top re- inforcement (composite) of fittings and change in the concrete class is determined and presented in the article. Currently, the interest in the use of composite reinforcement as a working reinforcement of concrete structures in Russia has increased significantly, which is reflected in the increase of the number of scientific and practical publications devoted to the study of the properties and use of composite materials in construction, as well as emerging draft documents for design of such structures. One of the proposals for basalt reinforcement application is to use it in bending elements with combined reinforcement. For theoretical justification of the proposed nature of reinforcement and improvement of the calculation method the authors conduct a study of stress-strain state of continuous beams with the use of modern computing systems. The software program LIRA is most often used compared to other programs representing strain-stress state analysis of concrete structures.

DOI: 10.22227/1997-0935.2014.1.187-195

- Stepanova V.F., Stepanov F.Yu. Nemetallicheskaya kompozitnaya armatura dlya betonnykh konstruktsiy [Non-metallic Composite Reinforcement for Concrete Structures]. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering]. 2013, no. 1, pp. 45—47.
- Zyuzin R.S. Konstruktivnye osobennosti armirovaniya betonnykh konstruktsiy korrozionnostoykoy nemetallicheskoy kompozitnoy armatury [Design Features of Concrete Structures Reinforcement Using Corrosion Resistant Nonmetallic Composite Reinforcement]. Beton i zhelezobeton [Concrete and Reinforced Concrete]. 2009, no. 5, pp. 9—11.
- Kiba I. Vtoroe rozhdenie kompozitnoy armatury [The Second Birth of Composite Reinforcement]. Stroitel'nye materialy, oborudovanie, tekhnologii XXI veka [Building Materials, Equipment, Technologies of the 21st Century]. 2013, no. 8 (175), pp. 28—29.
- Madatiyan S.A. Perspektivy razvitiya stal'noy i nemetallicheskoy armatury zhelezobetonnykh konstruktsiy [Prospects of the Development of Steel and Non-metallic Reinforcing of Concrete Structures]. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering]. 2002, no. 9, pp. 16—19.
- Rakhmonov A.D., Solov'ev N.P. Predlozheniya po primeneniyu kompozitnoy armatury v karkasakh zdaniy [Proposals on Composite Reinforcement Application in the Framework of Buildings]. Vestnik SiBADI [Proceedings of Siberian State Automobile and Highway Academy]. 2013, no. 5, pp. 69—74.
- Rakhmonov A.D., Solov'ev N.P. Patent RF 134965, MPK E04S 3/20 U1. Balka monolitnogo zhelezobetonnogo mezhduetazhnogo perekrytiya. Zayavitel' i patentoobladatel' Povolzhskiy gosudarstvennyy tekhnologicheskiy universitett. Zayav. 03.06.2013, opubl. 27.11.2013, Byul. ¹ 1 [RF Patent 134965, IPC E04S 3/20 U1. Monolithic Reinforced Concrete Beam of Floor Structure. Applicant and patentee Volga State University of Technology. Appl. 03.06.2013, published 27.11.2013, Bulletin no. 1]. 2 p.
- Zaikin V.G., Valuyskikh V.P. Regulirovanie usiliy v nerazreznykh konstruktsiyakh v sostave kompleksnogo rascheta PK LIRA [Regulation of Strains in Continuous Structures as Part of Complex Calculation Using Software LIRA]. Beton i zhelezobeton [Concrete and Reinforced Concrete]. 2011, no. 6, no. 13—15.
- Zaikin V.G. Primenenie metoda avtomatizirovannogo pereraspredeleniya usiliy komp'yuternogo rascheta dlya monolitnykh plit perekrytiy bezrigel'nogo karkasa [Application of the Method of Computer Aided Redistribution of Computer Calculation Efforts for Monolithic Floor Slabs of the Frame without Collar Beams]. Beton i zhelezobeton [Concrete and Reinforced Concrete]. 2013, no. 3, pp. 25—28.
- Rakhmonov A.D., Solov'ev N.P. Vliyanie kombinirovannogo armirovaniya na napryazhenno-deformirovannoe sostoyanie izgibaemykh zhelezobetonnykh elementov [Combined Influence of Reinforcement on Stress-strain State of Bending Reinforced Concrete Elements]. Trudy Povolzhskogo gosudarstvennogo tekhnologicheskogo universiteta: Ezhegodnaya nauchno-tekhnicheskaya konferentsiya professorskogo sostava, doktorantov, aspirantov i sotrudnikov PGTU [Works of the Volga State Technological University: Annual Scientific and Technical Conference of PGTU Professors, Doctoral Students, Postgraduate Students and Staff]. Yoshkar-Ola, 2013, pp. 271—276.
- Jankowaik I., Madaj A. Numerical Modelling of the Composite Concrete — Steel Beam Inter—layer Bond. 8th Conference of Composite Structures. Zielona Gora, 2008. pp. 131—148.
- Floros D., Ingason O.A. Modeling and Simulation of Reinforced Concrete Beams. Chalmers University of Technology, Sweden, 2013, 78 p.
- Belakhdar K. Nonlinear Finite Element Analysis of Reinforced Concrete Slab Strengthened With Shear Bolts. Jordan Journal of Civil Engineering. 2008, vol. 2, no 1, pp. 32—44.