Construction Material Engineering

Stress-strain state of fiberglass in conditions of climatic aging

Vestnik MGSU 12/2018 Volume 13
  • Martynov Gleb V. - Peter the Great St. Petersburg Polytechnic University (SPbPU) undergraduate student, Peter the Great St. Petersburg Polytechnic University (SPbPU), 29 Polytechnicheskaya st., St. Petersburg, 195251, Russian Federation.
  • Monastyreva Daria E. - Peter the Great St. Petersburg Polytechnic University (SPbPU) undergraduate student, Peter the Great St. Petersburg Polytechnic University (SPbPU), 29 Polytechnicheskaya st., St. Petersburg, 195251, Russian Federation.
  • Morina Elena A. - Peter the Great St. Petersburg Polytechnic University (SPbPU) undergraduate student, Peter the Great St. Petersburg Polytechnic University (SPbPU), 29 Polytechnicheskaya st., St. Petersburg, 195251, Russian Federation.
  • Makarov Aleksey I. - Peter the Great St. Petersburg Polytechnic University (SPbPU) undergraduate student, Peter the Great St. Petersburg Polytechnic University (SPbPU), 29 Polytechnicheskaya st., St. Petersburg, 195251, Russian Federation.

Pages 1509-1523

Introduction. Were investigated samples of fiberglass with the aim of its effective use in construction in the long term. Fiberglass is considered one of the most versatile and durable materials among polymer composite materials, however, and it is subject to destruction. It is known that one of the main reasons for reducing the specified characteristics and material properties is operational. At the design stage, it is necessary to determine the most reliable and economical materials used and, accordingly, be sufficiently aware of their strength and durability. Thus, in order to avoid the destruction of the material, as well as significantly enhance and prolong its service life, it is necessary to be aware of how exactly the properties of the material change over time. Regarding reinforced concrete, wood, brick and steel fiberglass is used in construction recently. This means that while the service life of the list of the most common materials in construction is known to a sufficient extent, manufacturers do not dare to use fiberglass as a material for critical structures. This occurs because changes in its characteristics, depending on operational factors, are not sufficiently studied for intervals exceeding 4-5 years of operation. Materials and methods. During the work, samples of fiberglass SPPS with a longitudinal and transverse arrangement of fiberglass were tested for climatic aging in a climatic chamber for 5 cycles simulating 5 years of material operation. All samples were subjected to tensile testing on a tensile testing machine R-5. Results. Destructive stresses were determined, calculations were carried out and elastic and strength characteristics of the samples were analyzed. On the basis of the obtained results, an analysis was carried out, conclusions were formulated about the use of fiberglass in the construction in the long term, as well as the influence of such operational factors as moisture, positive and negative temperatures, and ultraviolet radiation on the properties of fiberglass with a different arrangement of fiberglass. Conclusions. Found that the destructive stresses of fiberglass are significantly reduced during the first two years of operation, which must be considered when choosing fiberglass with the stated characteristics. Ultraviolet does not have a significant effect on the elastic-strength properties of the material, while during operat

DOI: 10.22227/1997-0935.2018.12.1509-1523

Download

Results 1 - 1 of 1