Influence of constructive characteristics of a room on the parameters of regulators of automated climatic systems

Vestnik MGSU 2/2015
  • Samarin Oleg Dmitrievich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Assistant Professor, Department of the Heating and Ventilation, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoye shosse, Moscow, 129337, Russian Federa- tion; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Goryunov Igor’ Ivanovich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Professor, Manager, Automation of Construction Technologies Branch, Department of Information Systems, Technologies and Automation in Construction, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; +7 (499) 183-97-80; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Tishchenkova Irina Ivanovna - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Information Systems, Technologies and Automation in Construction, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 101-109

Currently, the successful development of construction industry depends on the improved energy performance of buildings, structures and facilities, as well as on the quality assurance of the indoor climate. In view of the above, designing and operation of buildings should be aimed at the best (optimal) solution of the following objective: to ensure the set-point values of indoor climate serviced by automated climate control systems, against the minimal energy consumption. In regard of its substantive structure, this paper describes the study on the relationship between the individual parameters of indoor thermal stability and the regulatory impact of automatic control systems (ACS). We analyzed the effect of structural room characteristics on the total energy consumption of the airflow processing unit in order to ensure energy saving. The final result is illustrated by numeric simulation with the use of a developed computer program and graphic examples. The proposed method is based on the assumption that the total thermal stability of the «room-ACVS-ACS» system is defined by heat absorption index of a room and the ACS control operation. This follows directly from the back-to-back connection of units corresponding to the room and ACVS in the scheme of automatic indoor climate control. Further study allowed authors to trace the influence of structural characteristics of a room on the total energy consumption needed for air intake treatment. This can be done by applying values of the main walling area. Basing on the developed algorithm, the authors made calculations using the computer program developed in Fortran. As a result a fragments of the program are presented - calculations of the parameters’ values included in the expressions and the total specific energy consumption for heating the air intake during the heating season, under varying room geometry, as well as the graphic illustration of the obtained relationships.

DOI: 10.22227/1997-0935.2015.2.101-109

  1. Gagarin V.G., Pastushkov P.P. Ob otsenke energeticheskoy effektivnosti energosberegayushchikh meropriyatiy [On Assessment of Power Efficiency of Energy Saving Measures]. Inzhenernye sistemy [Engineering Systems]. 2014, no. 2, pp. 26—29. (In Russian)
  2. Gorshkov A.S., Vatin N.I., Rymkevich P.P. Realizatsiya gosudarstvennoy programmy povysheniya energeticheskoy effektivnosti zhilykh i obshchestvennykh zdaniy [Implementation of a State Program of Power Efficiency Increase of Residential and Public Buildings]. Stroitel’nye materialy, oborudovanie, tekhnologii XXI veka [Construction Materials, Equipment, Technologies of the 21nd Century]. 2014, no. 1 (180), pp. 3939—3946. (In Russian)
  3. Chernov S.S. Sostoyanie energosberezheniya i povysheniya energeticheskoy effektivnosti v Rossii [State of Energy Saving and Increase of Power Efficiency in Russia]. Biznes. Obrazovanie. Pravo. Vestnik Volgogradskogo instituta biznesa [Business. Education. Law. Bulletin of the Volgograd Institute of Business]. 2013, no. 4 (25), pp. 136—140. (In Russian)
  4. Drozd D.V., Elistratova Yu.V., Seminenko A.S. Vliyanie vetra na mikroklimat v pomeshchenii [Influence of Wind on the Microclimate Indoors]. Sovremennye naukoemkie tekhnologii [Modern High Technologies]. 2013, no. 8, Part 1, pp. 37—39. (In Russian)
  5. Datsuk T., Pukhal V., Ivlev U. Forecasting of Microclimate in the Course of Buildings Design and Reconstruction. Advanced Materials Research. 2014, vol. 1020, pp. 643—648. DOI:
  6. Vuksanovic D., Murgul V., Vatin N., Pukhkal V. Optimization of Microclimate in Residential Buildings. Applied Mechanics and Materials. 2014, vol. 680, pp. 459—466. DOI:
  7. Samarin O.D., Fedorchenko Yu.D. Vliyanie regulirovaniya sistem obespecheniya mikroklimata na kachestvo podderzhaniya vnutrennikh meteoparametrov [The Influence of Microclimate Control Systems on the Grade of Maintenance of Internal Air Parameters]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 7, pp. 124—128. (In Russian)
  8. Tishchenkova I.I., Goryunov I.I., Samarin O.D. Research of the Operating Mode of the Regulator in the Automatic Climate Systems for Power Saving Purposes. Applied Mechanics and Materials. 2013, vols. 409—410, pp. 634—637. DOI:
  9. Gabrielaitiene I. Numerical Simulation of a District Heating System with Emphases on Transient Temperature Behaviour. Environmental Engineering : Pap. of the 8th International Conference, May 19—20, 2011, Vilnius, Lithuania. 2011, vol. 2, pp. 747—754.
  10. Halawa E., van Hoof J. The Adaptive Approach to Thermal Comfort: A Critical Overview. Energy and Buildings. 2012, vol. 51, pp. 101—110. DOI:
  11. Brunner G. Heat Transfer. Supercritical Fluid Science and Technology. 2014, vol. 5, pp. 228—263.
  12. Horikiri K., Yao Y., Yao J. Modelling Conjugate Flow and Heat Transfer in a Ventilated Room for Indoor Thermal Comfort Assessment. Building and Environment. 2014, vol. 77, pp. 135—147. DOI:
  13. Tae Sup Yun, Yeon Jong Jeong, Tong-Seok Han, Kwang-Soo Youm. Evaluation of Thermal Conductivity for Thermally Insulated Concretes. Energy and Buildings. 2013, vol. 61, pp. 125—132. DOI:
  14. Aghayan S.A., Sardari D., Mahdavi S.R.M., Zahmatkesh M.H. An Inverse Problem of Temperature Optimization in Hyperthermia by Controlling the Overall Heat Transfer Coefficient. Journal of Applied Mathematics. 2013, Vol. 2013, 9 p. Available at: Date of access: 20.12.2014. DOI:
  15. Allaire G., Habibi Z. Second Order Corrector in the Homogenization of a Conductive-Radiative Heat Transfer Problem. Discrete and Continuous Dynamical Systems — Series B. 2013, vol. 18, no. 1, pp. 1—36. DOI:
  16. Sagis L.M.C. Dynamic Behavior of Interfaces: Modeling with Nonequilibrium Thermodynamics. Advances in Colloid and Interface Science. 2014, vol. 206, pp. 328—343.
  17. Samarin O.D., Grishneva E.A. Povyshenie energoeffektivnosti zdaniy na osnove intellektual’nykh tekhnologiy [Increasing of Building Energy Efficiency Using Smart Technologies]. Energosberezheniye i vodopodgotovka [Energy Saving and Water Treatment]. 2011, no. 5 (73), pp. 12—14. (In Russian)
  18. Meyntser S.V. Bystrovozvodimye zdaniya promyshlennogo naznacheniya [Fast-built Buildings of Industrial Function]. Inzhenerno-stroitel’nyy zhurnal [Magazine of Civil Engineering]. 2009, no. 6 (8), pp. 9—11. (In Russian)
  19. Smirnov V.V., Savichev V.V. Osobennosti prognozirovaniya mikroklimata [Features of Microclimate Forecasting]. Santekhnika, otoplenie, konditsionirovanie [Bathroom Equipment, Heating, Conditioning]. 2013, no. 4 (136), pp. 71—75. (In Russian)
  20. Tabunshchikov Yu.A. Energoeffektivnye zdaniya i innovatsionnye inzhenernye sistemy [Power Effective Buildings and Innovative Engineering Systems]. Ventilyatsiya, otoplenie, konditsionirovanie vozdukha, teplosnabzhenie i stroitel’naya teplofizika [Ventilation, Heating, Air Conditioning, Heat Supply and Construction Thermophysics]. 2014, no. 1, pp. 6—11. (In Russian)


Results 1 - 1 of 1