RESEARCH OF BUILDING MATERIALS

Energy saving technology of ceramic tiles

Vestnik MGSU 10/2013
  • Zhukov Aleksey Dmitrievich - Moscow State University of Civil Engineering (National Research University) (MGSU) Candidate of Technical Sciences, Associate Professor, Department of Composite Materials Technology and Applied Chemistry, Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Gorbunov German Ivanovich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Professor, Department of Technology of Finishing and Insulation Materials, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Belash Natalya Aleksandrovna - Moscow State University of Civil Engineering (MGSU) Postgraduate student, Department of Technology of Finishing and Insulation Materials, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 122-130

Ceramic technology is based on three requirements: maintaining the product properties on the required level, reduction of energy costs, optimization of raw materials consumption and technological parameters. It is possible to obtain a product with improved operating abilities, at the same time optimizing the energy consumption, with the use of modern methods of thermal treatment, which include a combination of burning mechanisms in one technological conversion.The service durability of products is determined by the simultaneous influence of the factors, which are characterized by the properties of raw materials, the conditions of molding powder preparation, molding and thermal treatment. The usage of innovational technological methods allow to reduce the duration of the main energy consuming operations — the process of powder preparation can be reduced from 8—12 hours (traditional technology) up to 2—3 minutes, and the process of drying and burning from 2—3 days to 1—1.5 hours. The quality of ready products remains high.Ceramic tiles are primarily used as finishing material in the construction of residential, public and industrial buildings. Modern technologies of ceramic tiles provide not only crock glazing, but also applying other materials on it. This can extend the range of ceramic tiles application.

DOI: 10.22227/1997-0935.2013.10.122-130

References
  1. Gorbunov G.I. Otsenka prigodnosti otkhodov obrabotki prirodnogo kamnya i stekloboya dlya polucheniya granitokeramiki [Acceptability Evaluation of the Natural Stone and Glass Processing Waste for Granite Ceramic Production]. Nauchno-prakticheskiy Internet-zhurnal «Nauka. Stroitel'stvo. Obrazovanie» [Scientific-Practical Online Magazine "Science. Construction. Education"]. 2011, no.1, article 12. Available at: http://www.nso-journal.ru.
  2. Òessier L. Rossiyskim proizvoditelyam keramiki — unikal'nye resheniya kompanii IMERYS CERAMICS po primeneniyu mineral'nogo syr'ya [To the Russian Producers of Ceramics: the Unique Solutions of the Imerys Ceramics Company on Application of Mineral Raw Materials]. Steklo i keramika [Glass and Ceramics]. 2012, no. 3, pp. 43—48.
  3. Ashmarin G.D., Salakhov A.M., Boltakova N.V., Morozov V.P., Gerashchenko V.N., Salakhova R.A. Vliyanie porovogo prostranstva na prochnostnye kharakteristiki keramiki [The Influence of Pore Space on the Strength Behaviour of Ceramics]. Steklo i keramika [Glass and Ceramics]. 2012, no. 8, pp. 24—30.
  4. Poznyak A.I., Levitskiy I.A., Barantseva S.E. Bazal'tovye i granitoidnye porody kak komponenty keramicheskikh mass dlya plitok vnutrenney oblitsovki sten [Basalts and Granitoid Solids as Mass Ceramic Components for Internal Lining Tiles]. Steklo i keramika [Glass and Ceramics]. 2012, no. 3, pp. 36—42.
  5. Moore F. Rheology of Ceramic systems. Institute of Ceramics: Textbook Series, Applied Science Publishers, 1965, 170 p.
  6. Rumyantsev B.M., Zhukov A.D. Printsipy sozdaniya novykh stroitel'nykh materialov [The Principles of New Building Materials Production]. Internet-vestnik VolgGASU [Online Magazine of Volgograd State University of Architecture and Civil Engineering]. Politematical Series, 2012, no. 3(23). Available at: http://www.vestnik.vgasu.ru/
  7. Grigorieva T.F. Mechanochemical interaction of the kaolinite with the solid state acids. 12th International Symposium on the Reactivity of Solids. Hamburg, Germany, 132 p.
  8. Zhukova E.A., Chugunkov A.V., Rudnitskaya V.A. Sistemy fasadnoy otdelki [Fasade Decoration Systems]. Nauchno-prakticheskiy Internet-zhurnal «Nauka. Stroitel'stvo. Obrazovanie» [Scientific-Practical Online Magazine "Science. Construction. Education"]. 2011, no.1, article no. 15. Available at: http://www.nso-journal.ru.
  9. Pedersen Ò. Experience with Selee open pore foam structure as a filter in aluminium continuous rod casting and rolling. Wire Journal. 1979, vol. 12, no. 6. pp. 74—77.
  10. Worall W.E. Clays and Ceramic Raw Materials. University of Leeds, Great Britan,1978, 277 p.

Download

Results 1 - 1 of 1