ECONOMICS, MANAGEMENT AND ORGANIZATION OF CONSTRUCTION PROCESSES

Operation algorithm of the information system of improving organizational and technological reliability of construction projects using energy efficient technologies

Vestnik MGSU 10/2016
  • Ginzburg Aleksandr Vital’evich - Moscow State University of Civil Engineering (MGSU) (National Research University) Doctor of Technical Sciences, Professor, chair, Department of Information Systems, Technologies and Automation in Construction, Moscow State University of Civil Engineering (MGSU) (National Research University), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Ryzhkova Anastasiya Igorevna - Moscow State University of Civil Engineering (MGSU) (National Research University) postgraduate student, Department of Information Systems, Technologies and Automation in Construction, Moscow State University of Civil Engineering (MGSU) (National Research University), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 112-119

The main source for the development of construction projects with energy-efficient technologies in use is investments. The traditional approaches of risk management: insurance, diversification and redundancy only raise the cost of the construction project, which has a negative impact on the investor’s decision to invest. In order to solve this problem an information system has been developed, which is based on the principle of insightful analysis of the potential “pure” risks and a list of recommendations of risk management. This tool allows identifying all the weaknesses of a construction project, improving the organizational and technological reliability, and imparting an understanding to the investor / a customer of the resources required for the project implementation.

DOI: 10.22227/1997-0935.2016.10.112-119

Download

Results of expert response when forming an exhaustive list of potential risks of constructions projects using energy efficient technologies

Vestnik MGSU 10/2016
  • Ryzhkova Anastasiya Igorevna - Moscow State University of Civil Engineering (MGSU) (National Research University) postgraduate student, Department of Information Systems, Technologies and Automation in Construction, Moscow State University of Civil Engineering (MGSU) (National Research University), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 141-150

The author deals with the most widely used methods of risk events identification. The expert response method is most applicable for construction projects using energy efficient technologies. The article presents the results of an opinion poll of the professional expert community using expert response method, which is aimed to identify the most likely potential “pure” risk of construction projects with energy-efficient technologies in use. 74 experts representing different levels of the construction process were polled: customers and directors of construction companies, project managers, risk managers, advisors. The answers were collected during private talks and also using a special website Survey Monkey. Experts from different countries took part: Russia, Great Britain, Austria, Luxemburg, Switzerland and Norway. Also the article presents the expert evaluation of the “effect” of risk implementation on the cost of a project, implementation time, the product quality, the environment and safety on the construction site.

DOI: 10.22227/1997-0935.2016.10.141-150

Download

Formalized description of strategic control system functioning

Vestnik MGSU 10/2016
  • Sborshchikov Sergey Borisovich - Moscow State University of Civil Engineering (National Research University) (MGSU) Doctor of Economic Sciences, Professor, acting chair, Department of Technology, Organization and Management in the Construction, Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Leybman Dmitriy Mikhaylovich - Moscow State University of Civil Engineering (National Research University) (MGSU) postgraduate student, Department of Technology, Organization and Management in the Construction, Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 151-159

Investment and construction activity as a technical and economic system represents a complex of coordinated elements interdependent in frames of a more complicated structure and logically constituting a whole entity which is controlled basing on control actions stated in a plan. The processes of investment and construction activity are determined by different flows of workforce, raw materials, energy, main funds and investments. On the other hand the system functioning influences these flows. The article presents the structure of investment and construction activity as a technical-and-economic system with large number of input and output flows. For its functioning implementation of strategic control is necessary. The authors consider a suggestion that providing balanced and proportional growth basing on the general aim is the important result of strategy control. Both inner and outer impacts should be taken into account. The higher is the hierarchy level of the investment and construction activity, the higher the degree of complexity of control, management and decision-making functions grow. The formalized description of strategic controlling process is given.

DOI: 10.22227/1997-0935.2016.10.151-159

Download

Problem of relocation of citizens from unfit housing facilities exemplified by the regions

Vestnik MGSU 12/2016
  • Unacheva Lyana Ruslanovna - Moscow State University of Civil Engineering (National Research University) (MGSU) , Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 138-146

The problems of relocation of citizens from unfit and slum dwellings are considered. Residential property market analysis illustrating a house construction attenuation was performed. The problems of provision of quality and equivalent housing are touched, and the reasons for inaccessibility thereof are illustrated. Measures taken for control of quality of the provided houses are considered. Attention is drawn to development problems of the North Caucasus as an example of one of the problematic regions. For the system solution of the erected housing quality issue it is planned to introduce this year the obligation for a self-regulatory organization to have a permit for design and construction of low-rise buildings. It is necessary to focus on the quality of housing, on elimination of corruption, improvement of work of the body for the housing stock price formation, and the local self-governing authorities. The carried-out measures with due attention of regions’ authorities will enable to keep priority rates of the unfit dwelling liquidation and fulfil the general tasks set by the President and the RF Government.

DOI: 10.22227/1997-0935.2016.12.138-146

Download

REGIONAL CONSTRUCTION CLUSTER OF THE ASTRAKHAN REGION

Vestnik MGSU 1/2017 Volume 12
  • Anufriev Dmitriy Petrovich - Astrakhan State University of Architecture and Civil Engineering (ASUACE) Candidate of Technical Sciences, Professor, Rector, Astrakhan State University of Architecture and Civil Engineering (ASUACE), 18 Tatishcheva st., Astrakhan, 414056, Russian Federation.

Pages 99-106

Transition to market relations in the sphere of housing policy has fundamentally changed the role of the state in the construction industry. Management capabilities on the part of state and municipal authorities are limited. In these conditions, the use of cluster forms of organization and cooperation of labour is required for the regional economy development. Model of a regional construction cluster exemplified by the Astrakhan’ region is considered. Also, it is shown that such a complex socio-economic system refers to heterarchical systems. A three-tier model for description of business processes in a regional construction cluster is proposed. It is illustrated that an important feature of elements of such system is the possibility of random (unpredictable for decision-makers) change of their properties depending on influences of other elements of the system and the external environment. Objectives of the system are functions of aggregate properties and goals of its elements, and the level of aggregation depends on the goals and challenges facing the decision-makers as well as on the system management efficiency evaluation criteria adopted by them.

DOI: 10.22227/1997-0935.2017.1.99-106

Download

Basic theorizes of regulatory impact logistics in investment and construction

Vestnik MGSU 7/2014
  • Sborshchikov Sergey Borisovich - Moscow State University of Civil Engineering (National Research University) (MGSU) Doctor of Economic Sciences, Professor, acting chair, Department of Technology, Organization and Management in the Construction, Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Lazareva Natal'ya Valer'evna - Moscow State University of Civil Engineering (MGSU) assistant, Department of Organization Technology and Management in Construction, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Zharov Yaroslav Vladimirovich - Moscow State University of Civil Engineering (MGSU) assistant, Department of Technology, Management and Administration in the Construction, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 174-183

This article discusses the methods and models based on the principles of logistics of construction, connected with sustainable (balanced and optimal) development of construction investment and construction activity. Based on the performance taking place in the sphere of investment of the main and auxiliary construction processes, logistics, a new approach to dealing with the notion of a homeostatic state is proposed - the notion of dynamic optimum. With this approach, the objective of sustainable development investment and construction activities and its subsystems is to sustain its optimal trajectory. This definition implies the optimum identification and verification of industry and corporate level. The authors propose the variety of links between subsystems of construction investment, as well as between its areas of growth, which are only part of overall sustainable development providing optimal development of the individual subsystems. In order to determine the trajectory of sustainable development it is necessary to accurately delineate using the methods of logistics space border of construction investment, which can be reached at set time intervals. Knowing these boundaries is of particular importance for the development of long-term forecasts, operational and production plans, and for the effective management of subsystems.

DOI: 10.22227/1997-0935.2014.7.174-183

References
  1. Sborshchikov S.B. Teoreticheskie zakonomernosti i osobennosti organizatsii vozdeystviy na investitsionno-stroitel'nuyu deyatel'nost' [Theoretical Regularities and Features of Impacts on Investment and Construction Activity Organization]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2009, no. 2, pp. 183—187.
  2. Sborshchikov S.B. Sistemotekhnicheskoe opisanie problemy razgranicheniya planirovaniya i tekushchey proizvodstvennoy deyatel'nosti v stroitel'nykh organizatsiyakh [Systems Engineering Description of Delimitation Problem of Planning and Current Operations in Construction Organizations]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, vol. 1, no. 1, pp. 215—220.
  3. Song Y., Chua D. Modeling of Functional Construction Requirements for Constructability Analysis. Journal of Construction Engineering and Management. 2006, vol. 132, no. 12, pp. 1314—1326. DOI: http://dx.doi.org/10.1061/(ASCE)0733-9364(2006)132:12(1314).
  4. Pobegaylov O. A., Shemchuk A.V. Sovremennye informatsionnye sistemy planirovaniya v stroitel'stve [Modern Information Systems of Planning in Construction]. Inzhenernyy vestnik Dona [Engineering Proceedings of Don]. 2012, no. 2, pp. 20—25.
  5. Aleksanin A.V. Kontseptsiya upravleniya potokami stroitel'nykh otkhodov na baze kompleksnykh i informatsionnykh logisticheskikh tsentrov [Concept of Construction Waste Management on the Basis of Comprehensive Information and Logistics Centers]. Nauchnoe obozrenie [Scientific Review]. 2013, no. 7, pp. 132—136.
  6. Shevchenko V.S. Osobennosti upravleniya i motivatsii personala v usloviyakh innovatsionnoy deyatel'nosti stroitel'nogo predpriyatiya [Features of Staff Management and Motivation in Terms of Innovation Activity of Building Enterprise]. Novyy universitet. Seriya: ekonomika i pravo [New University. Series: Economics and Law]. 2012, no. 12, pp. 39—42.
  7. Zharov Ya.V. Uchet organizatsionnykh aspektov pri planirovanii stroitel'nogo proizvodstva v energetike [Account for Organizational Aspects in Case of Building Production Planning in Energy Sector]. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering]. 2013, no. 5, pp. 69—71.
  8. Georges A., Romme L., Endenburg G. Design: Construction Principles and Design Rules in the Case of Circular Design. Organization Science. 2006, vol. 17, no. 2, pp. 287—297. DOI: http://dx.doi.org/10.1287/orsc.1050.0169
  9. Haidar J.I. The Impact of Business Regulatory Reforms on Economic Growth. Journal of the Japanese and International Economies. 2012, vol. 26, no. 3, pp. 285—307.
  10. Radaelli C.M., Meuwese A. How the Regulatory State Differs. The Constitutional Dimensions of Rulemaking in the European Union and the United States. Rivista Italiana di Scienza Politica. 2012, no. 2, vol. 42, pp. 177—196. DOI: http://dx.doi.org/10.1426/37487.
  11. Dossick C., Neff G. Messy Talk and Clean Technology: Communication, Problemsolving and Collaboration Using Building Information Modelling. Engineering Project Organization Journal. 2011, no. 1 (2). Online publication date: 1.06.2011. Pð. 83—93. DOI: http://dx.doi.org/10.1080/21573727.2011.569929.
  12. May R.C., Puffer S.M., McCarthy D.J. Transferring Management Knowledge to Russia: a Culturally Based Approach. Academy of Management. 2009, vol. 19, no. 2, pp. 24—35.
  13. Belevtsov S.P. Upravlenie ustoychivym razvitiem logisticheskoy sistemy stroitel'noy organizatsii [Managing Sustainable Development of Logistics System in Construction Organization]. Inzhenernyy vestnik Dona [Engineering Proceedings of Don]. 2011, no. 4, pp. 18—23.
  14. Bozhko L.L. Otsenka effektivnosti reguliruyushchego vozdeystviya v sfere prigranichnogo sotrudnichestva [Effectiveness Assessment of Regulating Influence in the Sphere of Near-boarder Cooperation]. Voprosy Upravleniya [Management Questions]. 2011, no. 1 (14), pp. 14—20.
  15. Vasilenko Zh.A. Sistematizatsiya kriteriev otsenki ekonomicheskoy nadezhnosti sistemy upravleniya zhilishchnym stroitel'stvom [Criteria Classification for evaluating economic reliability of the Control System of housing Construction]. Inzhenernyy vestnik Dona [Engineering Proceedings of Don]. 2012, no. 3, pp. 707—710.
  16. Sborshchikov S.B. Teoreticheskie osnovy formirovaniya novykh organizatsionnykh skhem realizatsii investitsionno-stroitel'nykh proektov v energeticheskom sektore na osnove integratsii printsipov inzhiniringa i logistiki [Theoretical Bases of Formation of New Organization Charts for Implementing Construction Investment Projects in the Energy Sector Basing on Integration of the Principles of Engineering and Logistics]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2009, no. 1, pp. 146—150.

Download

DESIGN OF INTEGRATED SYSTEMS DESIGNATED FOR THE FORECASTING AND MONITORING OF EMERGENCIES IN BUILDINGS, STRUCTURES AND THEIR CLUSTERS

Vestnik MGSU 1/2013
  • Volkov Andrey Anatol'evich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Vice Rector for Information and Information Technologies, Chair, Department of Information Systems, Technology and Automation in Civil Engineering, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Rubtsov Igor' Vladimirovich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Professor, Chair, De- partment of Engineering Geodesy, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 208-2012

The authors propose their original method of design of systems designated for the forecasting and monitoring of emergencies in different types of buildings. The new method represents an integrated set of versatile activities and systems, including a layout of sensor elements and communication channels, installation of the monitoring system in a building, a structure, or a set (a cluster) of buildings and structures, pilot system operation, and metrological system testing.Critical values of controlled parameters are pre-set in accordance with an adaptive mathematical model developed on the basis of the design documentation and the data generated in the course of inspection of buildings and/or structures. If the parameters of a structure exceed critical values pre-set by the system, automated decision-making procedure is actuated. It may cause the operation of the building to stop or, alternatively, it may restrict or even prevent access to some areas inside the building. In some cases, one should analyze the time periods between regular inspections to determine whether additional tests are needed, or to run an additional monitoring system.

DOI: 10.22227/1997-0935.2013.1.208-2012

References
  1. Volkov A.A. Elementy kompleksnogo monitoringa kak sredstvo bezopasnoy ekspluatatsii stroitel'nykh ob"ektov [Elements of Integrated Monitoring Activities as the Instrument of Safe Operation of Construction Facilities]. Bol'shoy Rossiyskiy katalog. Stroitel'stvo. [Big Russian Catalogue. Construction.] Moscow, Katalogi i spravochniki publ., 2000, pp. 1327—1328.
  2. Volkov A.A. Bezopasnost' stroitel'nykh ob"ektov v chrezvychaynoy situatsii [Safety of Construction Facilities in Emergencies]. Sel'skoe stroitel'stvo [Rural Construction]. 2000, no. 3, pp. 42—43.
  3. Volkov A.A. Aktivnaya bezopasnost' stroitel'nykh ob"ektov [Active Safety of Construction Facilities]. Stroitel'naya mekhanika inzhenernykh konstruktsiy i sooruzheniy [Structural Mechanics of Construction Facilities], an interuniversity collection of research papers. Moscow, ASV Publ., 2000, no. 9, pp. 147—150.
  4. Shaposhnikov A.S. Analiz effektivnosti sistem monitoringa i prognozirovaniya chrezvychaynykh situatsiy prirodnogo i tekhnogennogo kharaktera na primere Moskvy [Analysis of Efficiency of Systems of Monitoring and Forecasting of Natural and Anthropogenic Emergencies Exemplifi ed by Moscow]. Tekhnologii grazhdanskoy bezopasnosti [Civil Safety Technologies]. 2009, vol. 6, no. 3-4, pp. 210—215.

Download

PRINCIPLES OF LOGISTICS IN CONSTRUCTION WASTE MANAGEMENT

Vestnik MGSU 2/2013
  • Aleksanin Aleksandr Vyacheslavovich - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Technology, Organization and Management of Construction Processes, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Sborshikov Sergey Borisovich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Associate Professor, Professor, Department of Technology, Organization and Management in the Construction Industry, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 197-203

Despite the widespread use of the logistic approach in many areas of human activities, analysis of references concerning its prospects causes the author to conclude that the prospects for the employment of the principles of logistics aimed at the improvement of efficiency of operation of the system of treatment of construction and demolition waste fails to enjoy sufficient consideration. Logistiсs-based management of streams of construction waste triggers production of raw materials, increases the output amount, reduces initial costs and prevents environmental pollution. The methodology of logistics makes it possible to optimize complex systems. Intensive development of the concept of an integrated system of waste control is boosted by the prospects for the application of secondary resources. In the article, expediency of introduction of principles of logistics into the theory and practice of construction waste management is proven. Substantial technological, economic and ecological effects of integration of the 3R (reduce, reuse, recycle) concept of construction waste management with logistic methods are considered.

DOI: 10.22227/1997-0935.2013.2.197-203

References
  1. Anikin B.A. Logistika [Logistics]. Moscow, INFRA-M Publ., 2008, pp. 12—15.
  2. Gadzhinskiy A.M. Logistika [Logistics]. Moscow, Dashkov i K? Publ., 2012, pp. 15—18.
  3. Aleksanin A.V. Sovershenstvovanie sistemy regulirovaniya obrashcheniya s otkhodami stroitel’nogo proizvodstva na osnove metodov logistiki [Improvement of the System of Regulation of Construction Waste Management on the Basis of the Principles of Logistics. Integratsiya, partnerstvo i innovatsii v stroitel’noy nauke i obrazovanii [Integration, Partnership and Innovations in the Construction Science and Education]. Sb. dokladov po itogam konferentsii. [Collection of conference papers. Moscow]. MGSU Publ., 2011, vol. 2, pp. 496—498.
  4. Plotkin B.K., Delyukin L.A. Ekonomiko-matematicheskie metody i modeli v logistike [Economic and Mathematical Methods and Models in Logistics]. St. Petersburg, SPbGUEF Publ., 2010, pp. 3—6.
  5. Aleksanin A.V., Sborshchikov S.B. Razrabotka metodiki effektivnogo upravleniya otkhodami stroitel’nogo proizvodstva [Development of a Methodology of Effective Construction Waste Management]. Ustoychivost’, bezopasnost’ i energoresursosberezhenie v sovremennykh arkhitekturnykh, konstruktivnykh, tekhnologicheskikh resheniyakh i inzhenernykh sistemakh zdaniy i sooruzheniy [Sustainability, Safety and Saving of Resources in the Presentday Architectural, Structural, Process Solutions and Engineering Systems of Buildings and Structures]. Sb. tezisov po itogam II Vseross. konf. s elementami nauchnoy shkoly dlya molodezhi [Collection of abstracts of the 2nd All-Russian Conference That Demonstrates Elements of School of Thought for Young People]. Moscow, MGSU Publ., 2011, pp. 7—10.
  6. Nikolashin V.M., Sinitsyna A.S. Osnovy logistiki [Logistics Fundamentals]. Moscow, GOU «Uchebno-metodicheskiy tsentr po obrazovaniyu na zheleznodorozhnom transporte» publ., 2007, 252 p.
  7. Lukinskiy V.S., Berezhnoy V.I. Logistika avtomobil’nogo transporta [Motor Transport Logistics]. Moscow, Finansy i statistika publ., 2004, 368 p.
  8. Lyubarskaya M.A. Organizatsionno-ekonomicheskiy mekhanizm formirovaniya regional’noy strategii obrashcheniya s tverdymi otkhodami na osnove logisticheskikh printsipov [Organizational and Economic Pattern of Formation of the Regional Strategy of Treatment of Solid Waste on the Basis of Principles of Logistics]. St. Petersburg, 2005, pp. 105—112.
  9. Gudkov V.A. Osnovy logistiki [Logistics Fundamentals]. Moscow, Goryachaya liniya –Telekom Publ., 2004, 351 p.
  10. Mirotin L.B. Transportnaya logistika [Transport Logistics]. Moscow, Ekzamen publ., 2003, pp. 46—57.
  11. Aleksanin A.V., Sborshchikov S.B. Povyshenie konkurentosposobnosti predpriyatiy stroitel’noy otrasli za schet integratsii 3 R-kontseptsii upravleniya otkhodami stroitel’nogo proizvodstva i logisticheskikh metodov [Improvement of the Competitive Strength of Construction Enterprises Using the 3R Concept of Management of Construction Waste and Methods of Logistics]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 8, pp. 419—422.

Download

USING LOGISTICS-BASED APPROACH TO IMPROVE THE MARKET OF RECYCLED CONSTRUCTION PRODUCTS

Vestnik MGSU 5/2013
  • Aleksanin Aleksandr Vyacheslavovich - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Technology, Organization and Management of Construction Processes, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Sborshchikov Sergey Borisovich - Moscow State University of Civil Engineering (National Research University) (MGSU) Doctor of Economic Sciences, Professor, acting chair, Department of Technology, Organization and Management in the Construction, Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 193-199

The process of manufacturing of various construction products is accompanied by the generation of huge amounts of versatile wastes. Application of construction waste in further production processes is possible in the aftermath of its pre-processing or even without it. Construction waste recycling can generate high revenues. The pattern of waste generation and further logistic flows of waste generated in the process of construction and demolition are presented in article. The analysis of the market of secondary, or recycled, construction products has revealed weaknesses of its operation. The proper choice of effective technologies for the treatment of building waste may turn into the basis for successful economic development of the construction industry in the Russian regions. The backwardness of the market of secondary resources misbalances supply and demand for market products. In this article, the pattern for development of logistics-based models of intensive development of the market of secondary construction resources is proposed. Application of this logistics-based approach will generate economic benefits and prevent environmental pollution.

DOI: 10.22227/1997-0935.2013.5.193-199

References
  1. Kalinina E.V. Obosnovanie vozmozhnosti vypuska stroitel’nykh materialov na osnove otkhodov proizvodstva kal’tsinirovannoy sody [Substantiation of Production of Construction Materials from Soda Ash Waste Products]. Stroitel’nye materialy [Construction Products]. 2012, no. 9, pp. 64—67.
  2. Gubanov D.A. Stroitel’nye kompozity na osnove otkhodov proizvodstva metallopolimernykh vodoprovodnykh trub [Construction Composites Made of Waste Products Generated in the Process of Production of Metal-polymeric Water Pipes]. Regional’naya arkhitektura i stroitel’stvo [Regional Architecture and Construction]. 2012, no. 2, pp. 60—63.
  3. Gumba Kh.M., Papel’nyuk O.V. Otsenka effektivnosti primeneniya novogo stroitel’nogo materiala [Assessment of Efficiency of Application of a New Building Material]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 3, pp. 176—181.
  4. Aleksanin A.V., Sborshchikov S.B. Logisticheskie printsipy upravleniya otkhodami stroitel’nogo proizvodstva [Principles of Logistics in Construction Waste Management]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 2, pp. 197—203.
  5. Aleksanin A.V., Sborshchikov S.B. Povyshenie konkurentosposobnosti predpriyatiy stroitel’noy otrasli za schet integratsii 3 R-kontseptsii upravleniya otkhodami stroitel’nogo proizvodstva i logisticheskikh metodov [Improvement of the Competitive Strength of Construction Enterprises Using the 3R Concept of Management of Construction Waste and Methods of Logistics]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 8, pp. 419—422.
  6. Asokan Pappua, Mohini Saxenaa, Shyam R. Asolekarb. Solid Wastes Generation in India and Their Recycling Potential in Building Materials. Building and Environment. 2007, vol. 42, no. 6, pp. 2311—2320.
  7. Dong Qing Zhang, Soon Keat Tan, Richard M. Gersberg. Municipal Solid Waste Management in China: Status, Problems and Challenges. Journal of Environmental Management. 2010, vol. 91, no. 8, pp. 1623—1633.
  8. Siti Nadzirah Othman, Zainura Zainon Noor, Ahmad Halilu Abba, Rafiu O. Yusuf, Mohd. Ariffin Abu Hassan. Review on Life Cycle Assessment of Integrated Solid Waste Management in Some Asian Countries. Journal of Cleaner Production. 2013, vol. 41, pp. 251—262.
  9. Efimenko A.Z. Stroitel’nye otkhody ot snosa zdaniy — syr’e dlya malootkhodnykh tekhnologiy [Building Demolition Waste as the Raw Material for Low-waste Technologies]. Stroitel’nye materialy [Construction Materials]. 2010, no. 12, pp. 73—75.
  10. Kostoglodov D.D. Marketing i logistika firmy [Corporate Marketing and Logistics]. Moscow, PRIOR Publ., 2000, 126 p.

Download

DEVELOPMENT OF A REGION-WIDE MECHANISM FOR CENTRALIZED MANAGEMENTOF CONSTRUCTION WASTE

Vestnik MGSU 6/2013
  • Aleksanin Aleksandr Vyacheslavovich - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Technology, Organization and Management of Construction Processes, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Sborshchikov Sergey Borisovich - Moscow State University of Civil Engineering (National Research University) (MGSU) Doctor of Economic Sciences, Professor, acting chair, Department of Technology, Organization and Management in the Construction, Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 229-235

Today no effective centralized control system is available for building waste. However, it may be generated through the establishment of special-purpose logistics centers. Logistics centers will be designated for the regulation of processes of building waste handling. Depending on the status of development of building waste control systems in specific regions, logistics centers of one of the following two types are to be installed: multi-component logistics centers or information logistics centers. The objective is to develop a mechanism for generation and transfer of information streams in order to compile an effective model of waste management for construction and demolition works. The mechanism is to involve each participant of waste-related processes. If this mechanism is in place, waste transportation and amount/composition analysis will be streamlined to assure timely information delivery to/from construction organizations, transport companies, waste processing enterprises, and consumers of secondary products. In the article, the mechanism of effective region-wide management of construction waste is proposed depending on the status of development of waste processing facilities in different areas (regions, etc.). Patterns of interaction between the parties involved in this process are also analyzed.

DOI: 10.22227/1997-0935.2013.6.229-235

References
  1. Yudin A.G. Smena paradigmy — ot upravleniya otkhodami k upravleniyu resursami [Paradigm Replacement: from Waste Management to Resources Management]. Ekologiya i promyshlennost’ Rossii [Ecology and Industry of Russia]. 2010, no. 3, pp. 30—32.
  2. Kostarev S.N. Razrabotka parametricheskoy modeli upravleniya poligonom tverdykh bytovykh otkhodov [Development of a Parametric Model for Solid Household Waste Landfill Management]. Sovremennye problemy nauki i obrazovaniya [Contemporary Problems of Science and Education]. 2013, no.1, pp. 188—196.
  3. Ulanova Z.A. Sistema obrashcheniya s tverdymi bytovymi otkhodami na rossiyskom severe [System of Solid Household Waste Treatment in the North of Russia]. Natsional’nye interesy: prioritety i bezopasnost’. [National Concerns: Priorities and Safety]. 2012, no. 47, pp. 62—65.
  4. Il’inykh G.V., Slyusar’ N.N., Korotaev V.N., Vaysman Ya.I., Samutin N.M. Issledovaniya sostava tverdykh bytovykh otkhodov i otsenka ikh sanitarno-epidemiologicheskoy opasnosti [Studies of the Composition of Solid Household Waste and Assessment of Its Sanitary and Epidemiological Harmfulness]. Gigiena i sanitariya [Hygiene and Sanitation]. 2013, no. 1, pp. 53—55.
  5. Aleksanin A.V., Sborshchikov S.B. Upravlenie stroitel’nymi otkhodami na osnove sozdaniya spetsializirovannykh logisticheskikh tsentrov [Construction Waste Management through Development of Specialized Logistics Centers]. Promyshlennoe i grazhdanskoe stroitel’stvo [Industrial and Civil Construction]. 2013, no. 2, pp. 66—68.
  6. Aleksanin A.V., Sborshchikov S.B. Povyshenie effektivnosti upravleniya otkhodami stroitel’nogo proizvodstva na osnove razvitiya informatizatsii i normativnoy bazy [Improvement of Efficiency of Management of Construction Waste through Development of Information Systems and the Regulatory Framework]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 1, pp. 148—155.
  7. Rukovodstvo k Svodu znaniy po upravleniyu proektami [Guidebook for Collection of Project Management Information]. PMI Publ., 2008, 241 p.
  8. Dablanca L., Ross C. Atlanta: a Mega Logistics Center in the Piedmont Atlantic Megaregion (PAM). Journal of Transport Geography. 2012, vol. 24, pp. 432—442.
  9. Kayikci Y. A Conceptual Model for Intermodal Freight Logistics Centre Location Decisions. Procedia - Social and Behavioral Sciences. 2010, vol. 2, no. 3, pp. 6297—6311.
  10. Eckhardta J., Rantala J. The Role of Intelligent Logistics Centres in a Multimodal and Cost-effective Transport System. Procedia - Social and Behavioral Sciences. 2012, vol. 48, pp. 612—621.

Download

UNIFIED DATA FORMAT IN CAD SYSTEMS

Vestnik MGSU 3/2012
  • Pavlov Aleksandr Sergeevich - Moscow State University of Civil Engineering (MSUCE) , Moscow State University of Civil Engineering (MSUCE), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Malykha Galina Gennadevna - Moscow State University of Civil Engineering (MSUCE) , Moscow State University of Civil Engineering (MSUCE), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Ignatev Oleg Vladimirovich - Moscow State University of Civil Engineering (MSUCE) , Moscow State University of Civil Engineering (MSUCE), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Kulikova Ekaterina Nikolaevna - Moscow State University of Civil Engineering (MSUCE) , Moscow State University of Civil Engineering (MSUCE), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 211 - 217

The main problem of data transmission unification is assurance of content consistency for information objects. Data consistency is necessary for development of a subsystem in integrated information systems. The analysis completed by the authors demonstrates that there is no data exchange format in CAD systems covering the whole variety of data to be transmitted via the communication channel. Therefore, STEP protocol (Standard for) (provided by international standard ISO 1030) is proposed for data transmission unification. The protocol determines a neutral data format realized through the product information model. This model incorporates the elements and the configuration of the product, different geometrical models, administrative and special data.
All data are described in STEP using object-oriented language EXPRESS similar to the programming language. Access to EXPRESS data is provided by standard methods. EXPRESS language is designated for the conceptual description of the model. Global description is split into subject domains, or schemes. The information model represents interconnected schemes.
A scheme consists of a set of elements that may include entities, types, constants, rules, functions and procedures.

DOI: 10.22227/1997-0935.2012.3.211 - 217

References
  1. Gusakov A.A. Sistemotekhnika stroitel’stva [System Engineering of Construction]. Moscow, Stroyizdat Publ., 1993, 368 p.
  2. Malykha G.G. Nauchno-metodologicheskie osnovy avtomatizatsii proektirovaniya v mezhdunarodnykh stroitel’nykh proektakh [Scientific and Methodological Foundations of Design Automation in International Construction Projects]. Moscow, Moscow State University of Civil Engineering, 1999, 299 p.
  3. Pavlov A.S. Nauchnye osnovy peredachi informatsii i raspoznavaniya ob”ektov v sistemakh stroitel’nogo proektirovaniya [Scientific Principles of Information Transmission and Objects Identification in Computer Aided Design Systems]. Moscow, Moscow State University of Civil Engineering, 2003, 357 p.
  4. Vaynshteyn M.S. Metodologiya mnogofunktsional’noy avtomatizatsii poelementno-invariantnogo proektirovaniya zdaniy i sooruzheniy [Methodology of Multifunctional Automation of Per-element and Invariant Design of Structures and Buildings]. Moscow, Moscow State University of Civil Engineering, 2005, 377 p.

Download

INFORMATION SUPPORT OF LIFE CYCLES OF CONSTRUCTION FACILITIES

Vestnik MGSU 11/2012
  • Volkov Andrey Anatolevich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Chair, Department of Information Systems, Technology and Automation in Civil Engineering, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Losev Yuriy Grigorevich - Staryy Oskol Branch of Moscow State Institute of Steel and Alloys (MISIS) Candidate of Technical Sciences, Associate Professor, Chair, Department of Industrial and Сivil Engineering, Staryy Oskol Branch of Moscow State Institute of Steel and Alloys (MISIS), 42 Makarenko District, Staryy Oskol, 309516, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Losev Konstantin Yurevich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Associate Professor, Department of Information Systems, Technology and Automation in Construction, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 253 - 258

The authors have completed a research project that consists in the study of scientific and
technological fundamentals of an innovative construction technology that incorporates elements
of Product Life Cycle Management (PLM-elements) applied to low-rise buildings. Unified Modeling
Language (UML) has been applied to describe domain models of the construction technology. The
concept of low-rise construction that has PLM elements is based on a common information netspace
and a unified information model of a construction facility, or a BIM model. The BIM model
is developed on the basis of the Autodesk platform using Revit Suite software. The processes of
Product Data Management support are operated by PLM/PDM system, such as Lotsia PDM Plus
software. The main conclusion has been made that the implementation of the above technology is
only possible for an industrial cluster of low-rise residential buildings. Development of the above
cluster is a separate theoretical and practical challenge.

DOI: 10.22227/1997-0935.2012.11.253 - 258

References
  1. Ferronskaya A.V., editor. Gips v maloetazhnom stroitel’stve [Gypsum in Low-rise Construction]. Moscow, ASV Publ., 2008, pp. 169—178.
  2. Neyshtadt A. UML i unifi tsirovannyy protsess: prakticheskiy ob”ektno-orientirovannyy analiz i proektirovanie [UML and Unifi ed Process: Practical Object-orientated Analysis and Design]. Moscow, Lori Publ., 2008, 624 p.
  3. Lantsov A.L. Komp’yuternoe proektirovanie zdaniy [Computer Aided Design of Buildings]. Moscow, Foyli Publ., 2009, 619 p.
  4. Lotsia PDM Plus, Manual. Moscow, Lotsiya Softvea Publ., 2009, 268 p.
  5. Gromyko Yu.V. Chto takoe klastery i kak ikh sozdavat’? Epistemotekhnologicheskiy podkhod [What Are Clusters and How Can They Be Developed? An Epistemological Approach]. Al’manakh «Vostok» [“The East” Almanac]. 2007, no. 1(42). Available at: http://www.situation.ru/app/j_art_1178.htm. Date of access: 01.08.2012.
  6. Losev Yu.G., Losev K.Yu. Formirovanie podsistem prinyatiya resheniy gibkogo avtomatizirovannogo proizvodstva ob»ektov stroitel›stva [Formation of Decision Making Sub-systems for Systems of Flexible Computer-aided Production of Construction Facilities]. Promyshlennoe i grazhdanskoe stroitel’stvo [Industrial and Civil Engineering]. 2005, no. 10, pp. 36—37.
  7. Losev Yu.G., Losev K.Yu. Tekhnologiya informatsionnoy podderzhki innovatsionnoy stroitel’noy sistemy. III-y etap: «Issledovanie podsistemy IPI MZhS STS «EKODOM» na real’nom SO» [Technology of Information Support of an Innovative Construction Technology. 3rd stage. Research of Operation of Ecodom Sub-system Applicable to Real Construction Facilities]. Nauchno-tekhnicheskiy otchet (zaklyuchitel’nyy) vypolneniya III etapa Gosudarstvennogo kontrakta ¹ P1457. Federal’naya tselevaya programma «Nauchnye i nauchno pedagogicheskie kadry innovatsionnoy Rossii» na 2009—2013 gg. [Scientific and Technical Report (Final Report) of Completion of the 3d Stage of the State Contract no. P1457. Federal Target-oriented Programme “Research and Academic Training Staff of Innovative Russia in 2009—2013]. Moscow, MISIS Publ., 234 p.
  8. Malakhov V.I. Kontraktnye modeli vnedreniya investitsionnykh i stroitel’nykh proektov [Contractbased Models of Implementation of Investment and Construction Projects]. Available at: http://www.cfin.ru. Date of Access: 30.09.2009.
  9. Arakcheev D.V. Analiticheskoe i programmno-tekhnologicheskoe obespechenie podderzhki adaptatsii administrativnykh resheniy v ekologicheskom menedzhmente [Analytical, Software and Engineering Support of Adjustment of Administrative Decisions in Environmental Management]. Dubna, 2005, 23 p.
  10. Volkov A.A., Shul’zhenko S.N. Issledovanie i sistematizatsiya faktorov, vliyayushchikh na organizatsionnye i tekhnologicheskie usloviya stroitel’stva podzemnykh kommunikatsiy [Research and Systematization of Factors of Infl uence onto Organizational and Technological Conditions of Construction of Underground Utilities]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 6, pp. 491—500.

Download

DATA TRANSFER IN THE AUTOMATED SYSTEM OF PARALLEL DESIGN AND CONSTRUCTION

Vestnik MGSU 12/2012
  • Volkov Andrey Anatol'evich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Vice Rector for Information and Information Technologies, Chair, Department of Information Systems, Technology and Automation in Civil Engineering, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Gurov Vadim Valentinovich - Synergetic Projects Ltd Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Leading Engineer in charge of Planning in Construction doctoral student, Department of Information Systems, Technologies and Automation in Civil Engineering, Synergetic Projects Ltd Moscow State University of Civil Engineering (MGSU), Building 1, 20 Nagornaya st., Moscow, 117186, Russian Federation 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Kulikova Ekaterina Nikolaevna - Moscow State University of Civil Engineering (MSUCE) , Moscow State University of Civil Engineering (MSUCE), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Zadiran Sergey Mikhailovich - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, doctoral student, Department of Information Systems, Technologies and Automation in Civil Engineering, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 243 - 247

This article covers data transfer processes in the automated system of parallel design and construction. The authors consider the structure of reports used by contractors and clients when large-scale projects are implemented. All necessary items of information are grouped into three levels, and each level is described by certain attributes. The authors drive a lot of attention to the integrated operational schedule as it is the main tool of project management. Some recommendations concerning the forms and the content of reports are presented.
Integrated automation of all operations is a necessary condition for the successful implementation of the new concept. The technical aspect of the notion of parallel design and construction also includes the client-to-server infrastructure that brings together all process implemented by the parties involved into projects. This approach should be taken into consideration in the course of review of existing codes and standards to eliminate any inconsistency between the construction legislation and the practical experience of engineers involved into the process.

DOI: 10.22227/1997-0935.2012.12.243 - 247

References
  1. Volkov A.A, Lebedev V.M. Proektirovanie sistemokvantov rabochikh operatsiy i trudovykh stroitel’nykh protsessov v srede informatsionnykh tekhnologiy [Design of System Quanta of Operational and Labour Processes in the Information Technologies Environment]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2010, no. 2, pp. 293—296.
  2. Volkov A.A., Lebedev V.M., Kulikova E.N., Pikhterev D.V. Upravlenie i logistika v stroitel’stve: informatsionnye osnovy [Management and Logistic in the Construction Industry: Information Fundamentals]. Collected papers of the 19th Polish-Slovak Seminar «Theoretical Fundamentals of Construction». Moscow, ASV Publ., 2010, pp. 407—412.

Download

AUTOCAD IN THE OPERATIONAL MANAGEMENT OF THE CONSTRUCTION SITE

Vestnik MGSU 4/2016
  • Tsareva Marina Vladimirovna - Moscow State University of Civil Engineering (National Research University) (MGSU) Associate Professor, Department of Descriptive Geometry and Graphics, Moscow State University of Civil Engineering (National Research University) (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 140-147

Operational management of the construction is usually based on information analysis systems, which are aimed at the monitoring of working schedule and volumes as consistent with predicated schedules. The result of such systems’ operation is traditional information graphics (diagrams, charts, etc.), which provides idea on the current state of the construction site and deviations from the planned settings. The author considers the visualization technology of construction of objects using an image of the situation on the AutoCAD drawings, converted into an interactive format. The article focuses on imperfections of the existing technologies of information support of the managers. The creation of unified IT platform is offered on the basis of CAD for creating an integrated information storage and visualization of the environment using electronic drawings and diagrams. Using interactive methods it is possible to illustrate the condition of almost any part of the construction project using these drawings and diagrams. E-drawings contain the basic information resources - estimates, plans, sections, specifications, technology, construction, etc. necessary for the calculation of indicators. The author proved that implementation of visualization is most efficient in case of electronic drawings in 3D format.

DOI: 10.22227/1997-0935.2016.4.140-147

References
  1. Tsareva M.V. Situatsionnaya sistema dlya investitsionnogo proekta [Situational system for investment project]. Ob”edinennyy nauchnyy zhurnal. Ekonomika i finansy [Economics and Finance — Scientific Journal]. 2004, no. 27. (In Russian)
  2. Codd E.F., Codd S.B., Salley C.T. Providing OLAP (On-Line Analytical Processing) to User-Analysts : An IT mandate. Technical report. 1993. Available at: http://www.minet.uni-jena.de/dbis/lehre/ss2005/sem_dwh/lit/Cod93.pdf.
  3. Bazhin I.I. Informatsionnye sistemy menedzhmenta [Information Management Systems]. Moscow, GU VShE Publ., 2000, 687 p. (In Russian)
  4. Bowman W.J. Graphic Communication. 1968, John Wiley & Sons Inc, 222 p.
  5. Voronin V.A. Formirovanie integrirovannykh sub''ektov khozyaystvovaniya v stroitel’stve s primeneniem metoda kognitivnogo modelirovaniya [Formation of Integrated Business Entities in the Construction Using the Method of Cognitive Modeling]. Vestnik Universiteta (GUU) [University Bulletin (State University of Management)]. 2010, no. 7, pp. 102—110. (In Russian)
  6. Grachev V., Samodelov V. Primenenie sovremennykh tekhnologiy upravleniya v sovershenstvovanii deyatel’nosti predpriyatiy [The Use of Modern Technologies to Improve Management of Enterprises]. Finansovaya gazeta [Financial Newspaper]. 2007, no. 31. (In Russian)
  7. Zotov V.A. Problema razrabotki kognitivnykh sredstv vizualizatsii ekonomicheskoy informatsii v dinamike [Development Problem of Cognitive Visualization Tools of Economic Information in the Dynamics]. Informatsionnye tekhnologii v XXI veke : materialy nauchno-prakticheskoy konferentsii k 100-letiyu REA [Information Technologies on the 21st Century : Materials of Science and Practice Conference to 100 Anniversary of PRUE]. Moscow, Izdatel’stvo Rossiyskoy ekonomicheskoy akademii Publ., 2007. (In Russian)
  8. Kaplan R.S., Norton D.P. Strategy Maps: Converting Intangible Assets into Tangible Outcomes. Harvard Business Review Press, 1 edition, 2004, 454 p.
  9. Campbell A., Sommers K.L. Strategic Synergy (Management Readers). Butterworth-Heinemann, 1992, 240 p.
  10. Mescon M.H., Albert M., Khedouri F. Management: Individual and Organizational Effectiveness. Harpercollins College Div; 2 Sub edition, 1985, 756 p.
  11. Ponomareva N.I. Osobennosti formirovaniya uchetno-analiticheskoy sistemy v stroitel’nykh organizatsiyakh [Peculiarities of Formation of Accounting and Analytical Systems in Construction Companies]. Uspekhi sovremennogo estestvoznaniya [Success of Modern Natural Science]. 2008, no. 7, pp. 72—75. (In Russian)
  12. Trakhtengerts E.A. Komp’yuternaya podderzhka peregovorov pri soglasovanii upravlencheskikh resheniy [Computer Support of Negotiations When Discussing Administrative Decisions]. Moscow, Sinteg Publ., 2003, 272 p. (Seriya «Sistemy i problemy upravleniya» [Series: Systems and Problems of Management]) (In Russian)
  13. Walsh C. Key Management Ratios. T Press, 4 edition, 2009, 408 p.
  14. Edel’steyn G. Intellektual’nye sredstva analiza, interpretatsii i predstavleniya dannykh v informatsionnykh khranilishchakh [Intelligent Analysis, Interpretation and Presentation of Data in the Information Storage]. ComputerWeek-Moscow. 1996, no. 16, pp. 32—33. (In Russian)
  15. Tel’noy V.I., Tsareva M.V. Ispol’zovanie informatsionnykh tekhnologiy pri prepodavanii komp’yuternoy grafiki [Use of Information Technologies in Teaching Computer Graphics]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 6, pp. 161—165. (In Russian)
  16. Bachurina S.S., Resin V.I., Traynev V.A. Strategiya korporativnogo menedzhmenta v gradostroitel’stve [The Strategy of Corporate Management in Urban Planning]. Moscow, Dashkov i Ko Publ., 2010, 512 p. (In Russian)
  17. Drucker P.F. Management Challenges for the 21st Century. HarperBusiness, 1st edition, 224 p.
  18. Tel’noy V.I., Tsareva M.V., Rychkova A.V. Razrabotka trekhmernykh modeley pri provedenii zanyatiy po komp’yuternoy grafike [Development of Three-Dimensional Models in Conducting Classes in Computer Graphics]. Integratsiya, partnerstvo i innovatsii v stroitel’noy nauke i obrazovanii : sbornik materialov Mezhdunarodnoy nauchnoy konferentsii (12—13 noyabrya 2014 g., Moskva) [Integration, Partnership and Innovations in Construction Science and Education : Collection of the Materials of the International Scientific Conference (November 12—13, 2014, Moscow)]. Moscow, MGSU Publ., 2015, pp. 332—335. (In Russian)

Download

CONSTRUCTION OF BUILDINGS OF GENERAL EDUCATION INSTITUTIONS IN MOSCOW IN THE YEARS OF THE FIRST FIVE-YEAR PLAN

Vestnik MGSU 6/2013
  • Byzova Ol'ga Mikhaylovna - Moscow State University of Civil Engineering (MGSU) Candidate of Historical Sciences, Associate Professor, Department of History and Culture Studies; +7 (499) 183-21-29., Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 236-243

The author considers the actions aimed at the liquidation of illiteracy and introduction of universal primary education in the period of industrialization and culture dissemination in the USSR. The author draws attention to the fact that the fast-growing industry was in need of competent specialists and indicates the demand for wide-scale reforms in the education.The author argues that as a result of the implementation of the first five-year plan universal education was introduced in the country, illiteracy was eliminated and wide-scale secondary professional education was made available, highly skilled professionals and researchers were trained, etc. It is noteworthy that industrialization substantially improved the state of affairs in the country and in its capital.The author has studied numerous archived documents to present the evidence of development of a network of schools, higher number of students, organization of construction of school buildings, bigger amount of government funding of schools and other institutions for children in Moscow in the years of the first five-year plan.

DOI: 10.22227/1997-0935.2013.6.236-243

References
  1. Byzova O.M. Poryadok raskhodovaniya gosudarstvennykh posobiy na stroitel'nye nuzhdy dlya realizatsii programmy vseobshchego obucheniya v Rossii v nachale XX v. [Government Allowances for Construction Works within the Framework of Implementation of the General Education Programme in Russia in the Early 20th Century: Expenditure Procedures]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2010, no. 4, vol. 3, pp. 59—64.
  2. Kuznetsov A.I., Kuznetsov R.A. Kul'tura voprosov: istoriya obrazovaniya v Rossii [Issues of Culture: History of Education in Russia]. Moscow, 2011, pp. 133.
  3. Prokof'ev M.A., editor. Narodnoe obrazovanie v SSSR [Public Education in the USSR]. Moscow, 2008, p. 191.
  4. Massovoe prosveshchenie v SSSR (k itogam pervoy pyatiletki) [Wide-scale Education in the USSR (Results of the First Five-year Plan)]. Part 2. Moscow-Leningrad, 1933, p. 6.
  5. Kol'tsov A.V. Kul'turnoe stroitel'stvo v RSFSR v gody pervoy pyatiletki (1928—1932). [Culture Dissemination in the RFSSR in the Years of the First Five-year Plan (1928—1932)]. Moscow-Leningrad, 1960, p. 74.
  6. Byzova O.M. Osobennosti stroitel'stva obshcheobrazovatel'nykh uchrezhdeniy Moskvy v 1920—1930-e gg. [Peculiarities of Construction of Institutions of Secondary Education in Moscow in the 20ies and 30ies]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 6, pp. 6—10.
  7. Narodnoe obrazovanie. G. Moskva (osnovnye pokazateli) [Public Education. City of Moscow (Principal Indicators)]. Moscow, 1934, pp. 11—12.

Download

Research methods of the parameters of residential buildings construction

Vestnik MGSU 2/2015
  • Grigor’ev Vladimir Aleksandrovich - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Technology and Organization of Construction Production, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Oleynik Pavel Pavlovich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Department of Technology and Organization of Construction Production, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 168-177

The analysis of construction theory and practice shows that rational organizational and technological parameters of the construction of residential buildings should be based on the manifestation in time and space of the most important stages construction with their harmonization. Basing on the experience of normalizing the construction duration, it is advisable to express the complex of residential buildings’ construction processes by their basic stages - preparatory period, underground part, aboveground part, external engineering networks and land improvement. The main indicators of the development and implementation of optimization solutions are: the total duration of the construction, the duration of the preparation period, the duration of the construction of the underground part, the duration of the construction of the aboveground part, the duration of external engineering networks laying, the duration of land improvement. The indicators of the total duration of the construction of residential buildings, the construction the underground and aboveground parts are determined on the basis of the operation of one assembly crane on an object of up to four sections. In case of more sections two (three) cranes are considered and the total construction duration is set depending on these conditions. The duration of the construction of multisectional buildings is determined basing on the simultaneous construction of the stages or their combination with a certain time shift. However, this approach requires a significant amount of optimization solutions due to its multivariance. Therefore, in order to reduce the volume of calculations in some cases, for example, when planning the development of districts and neighborhoods, statistical methods can be used for determining the duration of the construction basing on the compilation of optimization solutions. The total duration of the construction and the duration of the main stages are multiple-choice. Therefore, variants with minimum and maximum values can be regarded as supporting. The researches showed that the difference between them is not so much in the technological scheme of construction, but in the gap between design and practical solutions. When creating an enlarged model of multisectional residential building construction we should keep in mind the following circumstances: a part of a residential building up to 6 sections is a section, and up to 4 sections - a division; selection of a division size is determined both by adjacent associated activities (sealing and embedment of joints, partitions creation, plumbing works, etc.) and economic conditions (the cost of tooling, additional financial support, etc.); technological sequence of precast concrete structures installation can be applied depending on the design and space-planning decisions; floor assembling begins with panels of external walls with significant labor input when terminating their seams; installation of panels should closely match the tolerances of bottom and top; the process of installing concrete structures should be monitored using geodetic laser technologies (LT, LN, LSZ, etc.); elevators installation is advisable to carry out at the same time with the precast concrete structures installation on the areas free of installation.

DOI: 10.22227/1997-0935.2015.2.168-177

References
  1. Gradostroitel’nyy kodeks Rossiyskoy Federatsii (GrK RF) ot 29.12.2004 № 190-FZ (red. ot 28.12.2013 s izmeneniyami, vstupivshimi v silu s 01.01.2014) [Town-Planning Codex of the Russian Federation from 29.12.2004 no. 190-FZ (revised 28.12.2013 with amendments in effect from 01.01.2014)]. Moscow, 2013, 159 p. (In Russian)
  2. Edinye normy prodolzhitel’nosti proektirovaniya i stroitel’stva predpriyatiy, zdaniy i sooruzheniy i osvoeniya proektnykh moshchnostey [General Norms of Design and Construction Duration of Enterprises, Buildings and Structures and Rated Capacities Testing]. Moscow, Stroyizdat Publ., 1983, 327 p. (In Russian)
  3. ISO 22263:2008. Organization of Information about Construction Works — Frame-Work for Management of Project Information. ISO, 2008, 14 p. Available at: http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=40835/. Date of access: 12.01.2015.
  4. Oleynik P.P., Grigor’yev V.A. Sovremennye metody modelirovaniya norm prodolzhitel’nosti stroitel’stva zhilykh zdaniy [Modern Methods of Modeling the Duration Norms of Residential Buildings Construction]. Tekhnologiya i organizatsiya stroitel’nogo proizvodstva [Technology and the Organization of Construction Production]. 2014, no. 2 (7), pp. 42—44. (in Russian)
  5. Kievskiy L.V., Khorkina Zh.A. Realizatsiya prioritetov gradostroitel’noy politiki dlya sbalansirovannogo razvitiya Moskvy [Implementation of Urban Policy Priorities for the Balanced Development of Moscow]. Promyshlennoe i grazhdanskoe stroitel’stvo [Industrial and Civil Engineering]. 2013, no. 8, pp. 54—57. (In Russian)
  6. Mukhametzyanov Z.R., Gusev E.V. Sovremennyy podkhod k modelirovaniyu tekhnologii stroitel’stva promyshlennykh ob”ektov [Modern Approach to Modeling of Industrial Construction Technology]. Promyshlennoe i grazhdanskoe stroitel’stvo [Industrial and Civil Engineering]. 2012, no. 10, pp. 68—69. (In Russian)
  7. Oleinik P.P., Grigorieva L.S., Brodsky V.I. Outstripping Engineering Preparation of Construction Sites. Applied Mechanics and Materials. 2014, vol. 580—583, pp. 2294—2298. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMM.580-583.2294.
  8. Petrov A.A. Strategic Planning in Saint Petersburg as a Manifestation of Transition to Sustainable Development Economy. Middle-East Journal of Scientific Research. 2014, vol. 21 (2), pp. 423—426.
  9. Ruch’ev A.P., Li Guan Qion. Organizatsionnye faktory obosnovaniya norm prodolzhitel’nosti stroitel’stva mnogoetazhnykh zhilykh domov [Organizational Factors of the Validity of Duration Norms of Apartment Buildings Construction]. Izvestiya vysshikh uchebnykh zavedeniy. Stroitel’stvo [News of Higher Educational Institutions. Construction]. 2005, no. 10, pp. 69—74. (In Russian)
  10. Volkov S.V., Volkova L.V., Shvedov V.N. Osobennosti proektirovaniya organizatsionno-tekhnologicheskikh skhem stroitel’stva zhilykh zdaniy [Design Features of Organization and Technological Schemes of Residential Buildings Construction]. Izvestiya vysshikh uchebnykh zavedeniy. Stroitel’stvo [News of Higher Educational Institutions. Construction]. 2013, no. 2—3, pp. 42—47. (In Russian)
  11. Oleynik P.P., Brodskiy V.I. Metodika normirovaniya pokazateley vypolneniya podgotovitel’nykh rabot [Methodology of Preparatory Work Rationing]. Tekhnologiya i organizatsiya stroitel’nogo proizvodstva [Technology and the Organization of Construction Production]. 2013, no. 1 (2), pp. 27—31. (in Russian)
  12. Oleynik P.P. Analiz i razrabotka norm prodolzhitel’nosti stroitel’stva inzhenernykh setey i kommunikatsiy [Analysis and Development of Construction Duration Norms of Engineering Networks and Communications]. Mekhanizatsiya stroitel’stva [Mechanization of Construction]. 2008, no. 6 (768), pp. 24—25. (In Russian)
  13. Chemodurov V.T., Vdovichenko V.V. Optimizatsiya parametrov stroitel'nykh konstruktsiy na etape proektirovaniya [Optimization of the Parameters of Building Structures at the Design Stage]. Sovremennye tekhnologii v stroitel'stve, dizayne, arkhitekture : sbornik materialov Mezhdunarodnoy nauchnoy konferentsii (g. Moskva, 25— 26 aprelya 2013 g.) [Modern Technologies in Construction, Design, Architecture : Collection of Materials of the International Conference (Moscow, April 25—26, 2013]. Kirov, MTsNIP Publ., 2013, pp. 84—91. (In Russian)
  14. D’yachkova O.N. Algoritm prinyatiya effektivnykh konstruktivno-tekhnologicheskikh resheniy zhilykh mnogoetazhnykh zdaniy [Taking Effective Design and Technological Solutions of Residential High-Rise Buildings]. Vestnik grazhdanskikh inzhenerov [Bulletin of Civil Engineers]. 2009, no. 1 (20), pp. 43—47. (In Russian)
  15. Nedavnii O.I., Bogatyreva M.M., Kuznetsov S.M., Kandaurova N.M. Improvement of Organizational and Engineering Reliability of Construction Machinery. Vestnik of Tomsk State University of Architecture and Building. English version appendix. 2014, no. 1, pp. 66—72.
  16. Volodin S.V. Podgotovka mestnykh normativov gradostroitel’nogo proektirovaniya [Developing Local Standards of Urban Design]. Promyshlennoe i grazhdanskoe stroitel’stvo [Industrial and Civil Engineering]. 2010, no. 7, pp. 30—31. (In Russian)
  17. Leonov V.V. Statistika zhiloy zastroyki v Moskve [Statistics of Residential Buildings in Moscow]. Promyshlennoe i grazhdanskoe stroitel’stvo [Industrial and Civil Engineering]. 2006, no. 10, pp. 25—27. (in Russian)
  18. Oleynik P.P. Organizatsiya stroitel’nogo proizvodstva [Organization of Construction Production]. Moscow, ASV Publ., 2010, 575 p. (In Russian)
  19. Afanas’ev A.A. Tekhnologicheskaya gibkost’ panel’nogo domostroeniya [Technological Flexibility of Panel-Type Housing Construction]. Promyshlennoe i grazhdanskoe stroitel’stvo [Industrial and Civil Engineering]. 2006, no. 4, pp. 49—50. (In Russian)
  20. Matreninskiy S.I. Metodologicheskiy podkhod k klassifikatsii territoriy massovoy zhiloy zastroyki dlya prinyatiya resheniy po ikh ekspluatatsii i pereustroystvu [Methodological Approach to the Classification of Mass Housing Development Areas for Making Decisions Concerning Their Maintenance and Reconstruction]. Nauchnyy vestnik Voronezhskogo gosudarstvennogo arkhitekturno-stroitel’nogo universiteta. Stroitel’stvo i arkhitektura [Scientific Herald of the Voronezh State University of Architecture and Construction. Construction and Architecture]. 2013, no. 1, pp. 49—56. (In Russian)

Download

RELATIONSHIP BETWEEN SHEAR STRESS AND FATIGUESTRENGTH OF METALLIC MATERIALS

Vestnik MGSU 4/2013
  • Gustov Yuriy Ivanovich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Department of Machinery, Machine Elements and Process Metallurgy, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; +7 (499) 183-94-95; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Voronina Irina Vladimirovna - Moscow State University of Civil Engineering (MGSU) Senior Lecturer, Department of Building and Hoisting Machinery, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; +7 (499) 182-16-87; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Allattouf Hassan Lattouf - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Mechanic Equip- ment, Details of Machines and Technology of Metals, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 31-37

The authors have demonstrated that coefficients of deformation and strength of metals can be applied to identify interrelationship between their shear stress and fatigue strength values.δThe authors have found that coefficient of proportionality ƒconnecting tensileвstrength σand hardness HB of magnesium alloys varies between 0.353 – 0.366 withthe average value equaling to 0.359. The coefficient of proportionality connecting shear stress τср and hardness HB varies between 0.246 – 0.267, and its average value equals to 0.254. Ratio S of shear stress to fatigue strength varies within 1.365 – 1.481, and its average value is equal to 1.410. For aluminum alloys, the above values are lower by 43% and 42%, respectively.δFor carbon steels, the coefficient of proportionality ƒ= 0.312 – 0.349, its averageδvalue is equal to 0.333, and for alloy steels, ƒ= 0.289 – 0.351, its average value is equalto 0.325. Coefficients of proportionality connecting the shear stress and hardness of carbon and alloy steels are equal to 0.172 – 0.229 and 0.134 – 0.223, with their average values being equal to 0.202 and 0.183.Therefore, the authors believe that the relation of shear stress values to fatigue strength values of the above non-ferrous and ferrous metals is close to one.

DOI: 10.22227/1997-0935.2013.4.31-37

References
  1. Gustov Yu.I. Povyshenie iznosostoykosti rabochikh organov i sopryazheniy stroitel’nykh mashin [Improvement of Wear Resistance of Operating Elements and Interfaces of Construction Machinery]. Moscow, 1994, 529 p.
  2. Gustov Yu.I., Gustov D.Yu., Voronina I.V. Metodologiya opredeleniya tribo-tekhnicheskikh pokazateley metallicheskikh materialov [Methodology for Identification of Tribo-engineering Values of Metallic Materials]. Teoreticheskie osnovy stroitel’stva: XV Slovatsko-rossiysko-pol’skiy seminar: sb. dokladov. [Theoretical Fundamentals of Civil Engineering. 15th Slovac-Russian-Polish Workshop. Collected Reports]. Moscow, 2007, pp. 339—342.
  3. Gustov Yu.I. Tribotekhnika stroitel’nykh mashin i oborudovaniya [Tribo-engineering of Construction Machinery and Equipment]. Moscow, MGSU Publ., 2011, 192 p.
  4. Gustov Yu.I., Gustov D.Yu., Yarmolik N.V. Vybor materialov dlya tribosistem i metallo-konstruktsiy stroitel’noy tekhniki [Selection of Materials for Tribosystems and Metal Structures of Construction Machinery]. Interstroymekh — 2008. Materialy Mezhdunar. nauch.-tekhn. konf. [Interstroymech – 2008. Works of International Scientific and Technical Conference]. Vladimir, 2008, vol. 2, pp. 35—40.
  5. Gustov Yu.I. Energotopograficheskiy metod issledovaniya iznosostoykosti metallov [Power Topography Method of Research into Wear Resistance of Materials]. Novoe v metallovedenii. Nauchno-prakticheskiy seminar. Sb. dokladov. [Metal Science News. Scientific and Practical Workshop. Collected Reports.] Moscow, MGSU Publ., 2009, pp. 3—7.
  6. Tylkin M.A. Spravochnik termista remontnoy sluzhby [Reference Book for Repair Service Heat- Treaters]. Moscow, Metallurgiya Publ., 1981, 647 p.
  7. Babichev A.P., Babushkina I.A., Bratkovskiy A.M. Fizicheskie velichiny [Physical Values]. Moscow, Energoatomizdat Publ., 1991, 1232 p.
  8. Arzamasov B.N., Solov’eva T.V., Gerasimov S.A. Spravochnik po konstruktsionnym materialam [Reference Book of Structural Materials]. Moscow, MGTU im. N.E. Baumana Publ., 2005, 640 p.
  9. Sorokin V.G., Volosnikova A.V., Vyatkin S.A. Marochnik staley i splavov [Book of Steel and Alloy Grades]. Moscow, Mashinostroenie Publ.,1989, 640 p.

Download

DATA PROCESSING SYSTEM IN CAD SYSTEMS

Vestnik MGSU 1/2012
  • Sinenko Sergey Anatol'evich - Doctor of Technical Sciences, Professor, Professor information systems, technology and automation in construction 8-(499)-183-49-06; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Malykha Galina Gennad'evna - MSUCE Doctor of Technical Sciences, professor, head Department of Civil Engineering Informatics 8-(499)-188-51-10, MSUCE, 129337, Moscow, Yaroslavskoje sh., 26; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Vainstein Michael Semenovich - Doctor of Technical Sciences, professor of information systems, technology and automation in construction 8-(499)-183-49-06; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Guseva Olga Borisovna - MSUCE Associate Professor of Computer Science Building 8-(499)-188-51-10, MSUCE, 129337, Moscow, Yaroslavlskoje sh., 26; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 164 - 171

DATA PROCESSING SYSTEM IN CAD SYSTEMS
The authors determine the problems in the field of CAD systems development and modeling showing general formalization methods used in structural design. The paper also considers software and dataware development for these systems.

DOI: 10.22227/1997-0935.2012.1.164 - 171

References
  1. Malykha G.G. Nauchno-metodologicheskie osnovy avtomatizacii proektirovanija v mezhdunarodnyh stroitel'nyh proektah [Scientific and methodological principles of design automation in international construction projects], Moscow, MSUCE, 1999, 299 p.
  2. Pavlov A.S. Nauchnye osnovy peredachi informacii i raspoznavanija objektov v sistemah stroitel'nogo proektirovanija [Scientific principles of information transmission and objects identification in construction computer aided design systems], Moscow, MSUCE, 2003, 357 p.
  3. Vainstein M.S. Metodologija mnogofunkcional'noj avtomatizacii pojelementno-invariantnogo proektirovanija zdanij i sooruzhenij [Methodology of multifunctional automation of elemental and invariant design process of structures and buildings], Moscow, MSUCE, 2005, 377 p.

Download

MODELING OF DESIGN PROCESS AUTOMATION FOR LOGISTICS SYSTEMS AND DATA FLOW PROCESSES IN CONSTRUCTION

Vestnik MGSU 1/2012
  • Martinson Oleg Evgenievich - Moscow State University of Civil Engineering (MSUCE) graduate student of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Fahratov Victor Muhammetovich - Moscow State University of Civil Engineering (MSUCE) graduate student of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Selezneva Elena Vjzcheslavovna - Moscow State University of Civil Engineering (MSUCE) applicant department of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Kulikova Ekaterina Nikolajevna - Moscow State University of Civil Engineering (MSUCE) candidate technical sciences, assistant professor of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 188 - 191

The authors set out the basic principles for development of logistics systems models. Additionally detailed classification of models and modeling methods for such systems are described in the paper.

DOI: 10.22227/1997-0935.2012.1.188 - 191

References
  1. Stakhanov E.N., Ivakin, E.?. Logistika v stroitel'stve [Logistics in construction]. Moscow, Prior, 2001, 176 p.
  2. Zhavoronkov E.P. Jeffektivnost' logistiki v stroitel'stve [Efficiency of logistics in construction]. Moscow, KIA Zentr, 2002, 136 c.

Download

THE PROBLEMS OF MODELING AND DESIGN AUTOMATION FOR ORGANIZATIONAL AND TECHNOLOGICAL SYSTEMS

Vestnik MGSU 1/2012
  • Fahratov Victor Muhammetovich - Moscow State University of Civil Engineering (MSUCE) graduate student of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Martinson Oleg Evgenievich - Moscow State University of Civil Engineering (MSUCE) graduate student of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Kulikova Ekaterina Nikolajevna - Moscow State University of Civil Engineering (MSUCE) candidate technical sciences, assistant professor of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Selezneva Elena Vjzcheslavovna - Moscow State University of Civil Engineering (MSUCE) applicant department of information systems, technology and automation in construction (ISTAS) +7-(499)-183-49-06, Moscow State University of Civil Engineering (MSUCE), 26, Jaroslavskoe shosse, Moscow, 129337, Russia; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 192 - 195

The paper considers the example containing solutions for wide range of problems concerning modeling and organizational and technological systems used for servicing of construction machinery fleet. The new theoretical base for developing mechanization enterprises is offered.

DOI: 10.22227/1997-0935.2012.1.192 - 195

References
  1. Barzilovich E.Y. Modeli tehnicheskogo obsluzhivanija slozhnyh sistem [Models of complex systems servicing]. Moscow, Vysshaya shkola, 1982, 231 p.
  2. Burkov V.N., Voropaev V.I., Sekletova G.I. et al. Matematicheskie osnovy upravlenija proektami [Mathematical fundamentals of project management]. Moscow, Vysshaya shkola, 2005, 423 p.
  3. Griff M.I. Osnovy sozdanija i razvitija specializirovannogo avtotransporta dlja stroitel'stva [Principles of creation and development of specialized construction vehicle]. Moscow, Vysshaya shkola, 2005, 144 p.
  4. Gasakov A.A. Sistemotehnika stroitel'stva. Jenciklopedicheskij slovar' [Systems engineering in construction. Encyclopaedic dictionary]. Moscow, Fund “Novoe tysiacheletie”, 1999, 432 p.

Download

Results 21 - 40 of 51