TECHNOLOGY OF CONSTRUCTION PROCEDURES. MECHANISMS AND EQUIPMENT

Microtopographic parameters of friction surfaces of construction machinery and equipment

Vestnik MGSU 9/2012
  • Gustov Yuriy Ivanovich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Department of Mechanical Equipment, Elements of Machines and Technology of Metals 8 (499) 183-94-95, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Lyubushkin Kirill Aleksandrovich - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Mechanical Equipment, Elements of Machines and Technology of Metals 8 (499) 183- 94-95, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Orekhov Aleksey Aleksandrovich - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Mechanical Equipment, Elements of Machines and Technology of Metals 8 (499) 183- 94-95, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 179 - 184

The article covers the concepts, definitions and correlations of parameters of worn surfaces
within the coordinate system of relative pressures and convergences of interacting elements of
construction machines.
The authors provide their findings based on the research of microtopographic and tribological
engineering parameters of scoop hinges of construction drags and fused crushing plates of jaw
crushers. As for the drag hinges, the friction pair is to include steel 110Г1ZL and X-5 padding that
demonstrates high resistance to friction (=1.04) and low temperature of frictional heating (ƒ= 90
°C). Mobile plates of jaw crushers need electrodes VSN-9 and TsN-16 for padding purposes, as they
demonstrate the biggest frictional fatigue values (= 2.76 and 2.62, respectively) and insignificant
temperature of heating of friction surfaces (9.4 and 4.9 °C). Electrodes TsN-16, T-590 and KBKh-45
are recommended for fixed plates.
Microtopographic parameters of worn friction surfaces are used to analyze the main tribological
engineering parameters of operating elements and joints of construction machines and items of
equipment.

DOI: 10.22227/1997-0935.2012.9.179 - 184

References
  1. Gustov Yu.I. Povyshenie iznosostoykosti rabochikh organov i sopryazheniy stroitel’nykh mashin [Improvement of Wearability of Operating Elements and Joints of Construction Machines]. Moscow, MGSU Publ., 1994, 529 p.
  2. Korobko V. I. Zolotoe sechenie i problemy garmonii sistem [The Golden Section and Problems of Harmony of Systems]. CIS ASV Publ., Moscow, 1998, 373 p.
  3. Chihos H. Sistemnyy analiz v tribonike [The System Analysis in Tribology]. Moscow, MIR Publ., 1982, 351 p.
  4. Gustov Yu.I. Tribotekhnika stroitel’nykh mashin i oborudovaniya [Tribological Engineering of Construction Machines and Equipment]. Moscow, MGSU Publ., 2011, 192 p.
  5. Hebda M., Wachal A.. Trybologja. Wydawnictwa naukowo-techniczne. Warszawa, 1980, 611 p.
  6. Petrescu Florin Nicolae. Trjbologie. Institutul de Constructii Bucuresti. 1986, 275 p.
  7. Gustov Yu.I., Gustov D.Yu., Voronina I.V. Metodologiya opredeleniya tribotekhnicheskikh pokazateley metallicheskikh materialov [Methodology of Identification of Tribological Parameters of Metal Materials]. Collected works of the 16th Slovak-Russian-Polish Seminar “Theoretical Basics of Construction”. Zilina, Slovak Republic, 2007, pp. 339—342.
  8. Babichev A.P., Babushkina N.A., Bratkovskiy A.M. Fizicheskie velichiny: spravochnik [Physical Values: Reference Book]. Moscow, Energoatomizdat Publ., 1991, 1232 p.
  9. Gustov Yu.I., Voronina I.V. Modernizatsiya i remont samokhodnykh mashin [Modernization and Repair of Self-propelled Machines]. Materials of International Scientific and Technical Conference «Interstroymekh-2007». Samara, SGASU Publ., 2007, pp. 238—242.

Download

Results 1 - 1 of 1