DESIGNING AND DETAILING OF BUILDING SYSTEMS. MECHANICS IN CIVIL ENGINEERING

Problematics of stress-strain state research in units of metal structures

Vestnik MGSU 5/2014
  • Morozova Dina Vol'demarovna - Moscow State University of Civil Engineering (MGSU) Candidate of Technical Sciences, Associate Professor, Senior Researcher, Department of Architectural and Structural Design, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .
  • Serova Elena Aleksandrovna - Moscow State University of Civil Engineering (MGSU) postgraduate student, Department of Architectural and Structural Design, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Pages 44-50

The article describes the experimental methods of determining stress-strain state of elements and structures with a brief description of the essence of each method. The authors focus mostly on polarization-optical method for determining stresses in the translucent optical sensing models made of epoxy resins. Physical component of the method is described in the article and a simple diagram of a circular polariscope is presented, as well as an example of the resulting interference pattern in illuminated monochromatic light. A polariscope, in its most general definition, consists of two polarizers. The polarizers sandwich a material or object of interest, and allows one to view the changes of the polarity of light passing through the material or object. Since we are unable to perceive the polarity of light with the naked eye, we are forced to use polariscopes to view the changes in polarity caused by the temporary birefringence of our photoelastic materials. A polariscope is constructed of two polarizers, each set perpendicular to the path of light transmitted through the setup. The first polarizer is called the "polarizer", and the second polarizer is called the "analyzer". The method how the polarizer works is quite simple: unpolarized light enters the polariscope through the polarizer, which allows through only the light of its orientation. This light then passes through the material under observation, and experiences some change in polarity. Finally, this light reaches the analyzer, which, like the polarizer, only lets the light of its orientation through.

DOI: 10.22227/1997-0935.2014.5.44-50

References
  1. Morozova D.V., Serova E.A. Problema tekhniko-ekonomicheskogo obosnovaniya pri proektirovanii stykov metallicheskikh konstruktsiy [The Problem of the Feasibility Study in respect of Design of Joints of Metal Structures]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 12, pp. 219—223.
  2. Pisarenko G.S., Shagdyr T.Sh., Khyuvenen V.A. Eksperimental'no-chislennye metody opredeleniya kontsentratsii napryazheniy [Experimental and Numerical Methods for Determination of Stress Concentration]. Problemy prochnosti [Reliability Problems]. 1983, no. 8, pp. 3—6.
  3. Vayenberg D.V. Kontsentratsiya napryazheniy v plastinakh okolo otverstiy i vykruzhek [Stress Concentration around the Holes in the Plates and Fillets]. Kiev, Tekhnika Publ., 1969, 220 p.
  4. Kuz'min V.R. Metodika rascheta napryazhenno-deformirovannogo sostoyaniya v zonakh kontsentratsii napryazheniy po pokazaniyam tenzorezistorov [Method of Calculating Stress-strain State in the Areas of Stress Concentration According to Strain Gauges]. Svarka i khrupkoe razrushenie [Welding and Brittle Fracture]. Yakutsk, SO AN SSSR Publ., 1980, pp. 59—70.
  5. Savin G.N. Raspredelenie napryazheniy okolo otverstiy [Stress Distribution around Holes]. Kiev, Naukova dumka Publ., 1968, 887 p.
  6. Kasatkin B.S., Kudrin A.B. Eksperimental'nye metody issledovaniya deformatsiy i napryazheniy: spravochnoe posobie [Experimental Methods for Strain and Stress Study: a Reference Guide]. Kiev, Naukova dumka Publ., 1981, 586 p.
  7. Tareev B.M. Fizika dielektricheskikh materialov [Physics of Dielectric Materials]. Moscow, Energiya Publ., 1973, pp. 37.
  8. Strel'chuk N.A., Khesin G.L., Gubin F.F. Khesin G.L., editor. Metod fotouprugosti: v 3 t. T. 1. Reshenie zadach statiki sooruzheniy. Opticheski chuvstvitel'nye materialy [Photoelasticity Method. In 3 volumes. Vol.1. Solution of Construction Statics Problems. Optically Sensitive Materials]. Moscow, Stroyizdat Publ., 1975, pp. 73—85.
  9. Demidov S.P. Teoriya uprugosti [Elasticity Theory]. Moscow, Vysshaya shkola Publ., 1979, 432 p.
  10. Zavalishin S.I., Marshalkovich A.S., Morozova D.V., Shaytan K.V. Primenenie polimernykh opticheski chuvstvitel'nykh materialov v model'nykh issledovaniyakh napryazheniy [Application of Polymeric Optically Sensitive Materials in Model Studies Stress]. Vestnik MGU [Proceedings of Moscow State University]. 1976, no. 2, pp. 28—31.
  11. Zhavoronok I.V., Sakharov V.N., Omel'chenko D.I. Universal'naya interferentsionnaya-polyarizatsionnaya ustanovka UIP dlya metoda fotouprugosti [Universal Polarization-interference Installation for UTI-photoelasticity Method]. Materialy VIII vsesoyuznoy konferentsii po metodu fotouprugosti [Materials of the 8th All-Union Conference on Photoelasticity Method]. Tallin, AN ESSR Publ., 1979, vol. 2, pp. 41—46.
  12. Patra A.S., Khare Alika. Issledovanie dvuluchevogo polyarizatsionnogo geterodinnogo interferometra [Studies of Dual Beam Heterodyne Interferometer]. Opticheskiy zhurnal [Optical Journal]. 2005, no. 12, pp. 25—28.
  13. Gdoutos E.E., Theocaris P.S. A Photoelastic Determination of Mixed-mode Stressintensity Factors. Experimental Mechanics. 1978, vol. 18, no. 3, pp. 87—96. DOI: 10.1007/BF02325002.
  14. Perel'muter A.V., Slikver V.I. Raschetnye modeli sooruzheniy i vozmozhnost' ikh analiza [Calculation Models of Structures and Possibility of their Analysis]. 4th edition. Moscow, SKAD SOFT Publ., 2011, pp. 20—28.
  15. Doyle James F., Phillips James W., editors. Manual on Experimental Stress Analysis. Fifth Edition. Society for Experimental Mechanics, 2005, p. 5.
  16. Sanford R.J., Beaubien L.A. Stress Analysis of Complex Part: Photoelasticity vs. Finite Elements. Exper. Mech. 1977, vol. 17, no. 12, pp. 441—448. DOI: 10.1007/BF02324666.

Download

Results 1 - 1 of 1