Extending industrial objects’ life by introduction constructive measures

Вестник МГСУ 6/2015
  • Zolina Tat’yana Vladimirovna - State Autonomous Educational Institution of the Astrakhan area of higher education "Astrakhan State Architectural and Construction University" (JSC GAOU VPO "AGASU") Candidate of Technical Sciences, Professor, First Vice-rector, State Autonomous Educational Institution of the Astrakhan area of higher education "Astrakhan State Architectural and Construction University" (JSC GAOU VPO "AGASU"), 18 Tatishcheva str., Astrakhan, 414000, Russian Federation; Этот e-mail адрес защищен от спам-ботов, для его просмотра у Вас должен быть включен Javascript .
  • Tusnin Aleksandr Romanovich - Moscow State University of Civil Engineering (MGSU) Doctor of Technical Sciences, Professor, Chair, Department of Metal Structures, Moscow State University of Civil Engineering (MGSU), 26 Yaroslavskoe shosse, Moscow, 129337, Russian Federation.

Страницы 41-49

An accumulation of defects caused by the action of the loads both man-made and external leads to a decrease in the carrying capacity of the carcass structure during operation of industrial buildings. Most notably this problem manifests itself in the buildings equipped with crane equipment. During operation the columns and crane girders obtain significant deformation, and this entails a reduction in structural stiffness characteristics. At the same time a load factor is enhanced when using heavier equipment. Therefore, the main purpose of this study is to identify the opportunities to ensure the reliability required for an industrial building equipped with overhead cranes. The study has developed a complex of calculation methods, the main task of which is to estimate the residual resource of a specific period of technical system operation, taking into account the random nature of a whole set of disturbances. The analysis of the results obtained by the consistent implementation of these techniques allows tracking the dynamics of changes in the stress-strain state of load-bearing structures of industrial objects in operation.In order to solve the problem of providing rigidity frames and improve the reliability of their safe operation the authors propose constructive measures to slow the rate recorded in the calculation of the bearing capacity loss of the system. For this aim we suggest setting the end face transverse stiffening diaphragms, increasing the rigidity of the column above the crane, arranging some connecting rods in the temperature seam, located in the levels of coating and under crane beams. These measures should be used together, which allows achieving a significant effect in providing transverse rigidity. The coating disk with a sufficiently high horizontal rigidity is able to transfer a portion of the load acting on the transverse frames on transverse end faces of the diaphragm. The binder rods prevent relative lateral displacement of the temperature blocks relative to each other, thereby they put the entire frame under the action of horizontal crane loads into operation. Increasing the stiffness of the column above the crane allows transferring a significant part of the effort to the coating when the bridge crane has close proximity to the coating.The proposed constructions are easy to manufacture and do not require the device holes, which weaken the structure. They can be made not only while erecting the buildings, but also in the already constructed ones by increasing the carrying capacity of the overhead cranes. In this paper we evaluate the effectiveness of the proposed measures to improve the structural rigidity of frameworks on the example of several industrial buildings. The comparative analysis of the results obtained before and after the introduction of affirmative action has shown that their arrangement reduces the horizontal displacements of the frame, in the level of crane girders, and the level of coating, with a larger effect observed in the buildings with heavy-duty overhead cranes. This reduction of displacement involves the growth of bending moments values in above the crane column part and the reduction of the magnitude moments in the under crane part. At the great height under the crane portion of the column in most buildings these changes can save generally significant amounts of steel for the framework.Thus, the proposed technical solutions are aimed not only at extending the safe operation of industrial buildings, but also have a positive effect in case of re-production associated with an increase in the lifting capacity of crane equipment, with little financial cost.

DOI: 10.22227/1997-0935.2015.6.41-49

Библиографический список
  1. Gordeev V.N., Lantukh-Lyashchenko A.I., Pashinskiy V.A., Perel’muter A.V., Pichugin S.F. Nagruzki i vozdeystviya na zdaniya i sooruzheniya [Loads and Effects on Buildings and Structures]. Moscow, ASV Publ., 2007, 482 p. (In Russian)
  2. Gordeev V.N., Lantukh-Lyashchenko A.I., Pashinskiy V.A., Perel’muter A.V., Pichugin S.F. Nagruzki i vozdeystviya na zdaniya i sooruzheniya [Loads and Effects on Buildings and Structures]. Moscow, 3rd edition, ASV Publ., 2011, 528 p. (In Russian)
  3. Bolotin V.V. Stochastic Models of Fracture with Applications to the Reliability Theory. Structural Safety and Reliability. Amsterdam, Oxford, New York, Elsevier, 1981, pp. 31—56.
  4. Ditlevsen O. Reliability against Defect Generated Fracture. Journal of Structural Mechanics. 1981, vol. 9, no. 2, pp. 115—137. DOI:
  5. Blockley D.I. Reliability Theory — Incorporating Gross Errors. Structural Safety and Reliability. Eds. T. Moan, M. Shinozuka. Amsterdam, Oxford, New York, Elsevier, 1981, pp. 259—282.
  6. Pshenichkina V.A., Belousov A.S., Kuleshova A.N., Churakov A.A. Nadezhnost’ zdaniy kak prostranstvennykh sostavnykh sistem pri seysmicheskikh vozdeystviyakh [Reliability of Buildings as Spatial Composite Systems under Seismic Actions]. Volgograd, VolgGASU Publ., 2010, 180 p. (In Russian)
  7. Lin Y.K., Shih T.Y. Column Response to Horizontal and Vertical Earthquakes. Journal of Engineering Mechanics Division, ASCE. 1980, vol. 106, no. EM-6, pp. 1099—1109.
  8. Rayzer V.D. Teoriya nadezhnosti v stroitel’nom proektirovanii : monografiya [Reliability Theory in Construction Design: Monograph]. Moscow, ASV Publ., 1998, 304 p. (In Russian)
  9. Holicky M., Ostlund L. Vagueness of Serviceability Requirements. Proceeding of the International Conference “Design and Assessment of Building Structures”. Vol. 2. Prague, 1996, pp. 81—89.
  10. Hoef N.P. Risk and Safety Considerations at Different Project Phases. Safety, Risk and Reliability — Trends in Engineering. International Conference, Malta. 2001, pp. 1—8.
  11. Tamrazyan A.G. Otsenka riska i nadezhnosti nesushchikh konstruktsiy i klyuchevykh elementov — neobkhodimoe uslovie bezopasnosti zdaniy i sooruzheniy [Risk and Reliability Assessment of Structures and Key Elements — A Necessary Condition for the Safety of Buildings and Structures]. Vestnik NITs «Stroitel’stvo» [Proceedings of the Research Center of Construction]. 2009, no. 1, pp. 160—171. (In Russian)
  12. Tamrazyan A.G. Raschet elementov konstruktsiy pri zadannoy nadezhnosti i normal’nom raspredelenii nagruzki i nesushchey sposobnosti [Design of Structural Elements in the Event of the Preset Reliability, Regular Load and Bearing Capacity Distribution]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 10, pp. 109—115. (In Russian)
  13. Bolotin V.V. Prognozirovanie resursa mashin i konstruktsiy [Resource Projections of Machines and Structures]. Moscow, Mashinostroenie Publ., 1984, 312 p. (In Russian)
  14. Moan T., Holand I. Risk Assessment of Offshore Structures: Experience and Principles. Structural Safety and Reliability. Eds. T. Moan, M. Shinozuka. Amsterdam, Oxford, New York, Elsevier, 1981, pp. 803—820.
  15. Zolina T.V. Svodnyy algoritm rascheta promyshlennogo ob
  16. Brown C.B. Entropy Constructed Probabilities. Journal of Engineering Mechanics, ASCE. 1980, vol. 106, no. EM-4, pp. 633—640.
  17. Tichy M. On the Reliability Measure. Struct/Safety. 1988, vol. 5, pp. 227—235.
  18. Lychev A.S. Veroyatnostnye metody rascheta stroitel’nykh elementov i system [Probabilistic Methods for Design of Construction Components and Systems]. Moscow, ASV Publ., 1995, 143 p. (In Russian)
  19. Zolina T.V., Sapozhnikov A.I. Patent № 2401364 RF, MPK E04B001/00. Konstruktivnye sredstva uvelicheniya prostranstvennoy zhestkosti odnoetazhnykh promyshlennykh zdaniy s mostovymi kranami [Russian Patent no. 2401364 RF, MPK E04B001/00/ Constructive Means of Increasing the Spatial Rigidity of Single-Storey Industrial Buildings with Overhead Cranes]. № 2008130209/03 ; zayavl. 27.01.2010 ; opubl. 10.10.2010. Byul. № 28 [No. 2008130209/03 ; appl. 27.01.2010 ; publ. 10.10.2010, bulletin no. 28]. Patent holder GAOU AO VPO «AISI». 7 p. (In Russian)
  20. Zolina T.V. Obespechenie bezopasnoy ekspluatatsii promyshlennykh zdaniy s kranovym oborudovaniem [Providing Safe Operation of Industrial Buildings with Crane Equipment]. Modernizatsiya regionov Rossii: investitsii v innovatsii: materialy IV Mezhdunar. nauchno-prakticheskoy konferentsii (15 oktyabrya 2010 g.) [Modernization of the Russian Regions: Investments into Innovations. Proceedings of the 4th International Science and Practice Conference (October 15, 2010)]. Astrakhan, Sorokin R.V. Publ., 2010, pp. 16—18. (In Russian)
  21. Zolina T.V., Sadchikov P.N. Kontseptual’naya skhema issledovaniya napryazhenno-deformirovannogo sostoyaniya promyshlennogo zdaniya [Conceptual Scheme for Investigating the Stress-Strain State of an Industrial Building]. Vestnik Volgogradskogo gosudarstvennogo arkhitekturno-stroitel’nogo universiteta. Seriya: Stroitel’stvo i arkhitektura [Proceedings of Volgograd State University of Architecture and Civil Engineering. Series: Construction and Architecture]. 2013, no. 33 (52), pp. 47—50. (In Russian)

Cкачать на языке оригинала

Результаты 1 - 1 из 1